Fiber-Q® 1060nm 200MHz Fiber-coupled Acousto-optic Modulator ( Non-Hermetic Package ) S-M200-0.1C2G-3-F2P
This non-hermetically packaged fiber-coupled acousto-optic modulator operates at 1060nm, with rise/fall edges specified as 10 nm in the source and an operating frequency of 200 MHz. Optional single-mode pigtails are available. IP54 sealing protects against dust and splashing water, without hermetic packaging. Typical applications include fiber lasers, optical sensing and pulse picking.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Crystal Material | TeO₂ |
| Wavelengths | 1060 nm |
| Average Optical Power Handling | maximum 1 W |
| Peak Optical Power Handling | Maximum 1 kW (depending on pulse width) |
| Insertion Loss | maximum 4 dB， typical 3.5 dB |
| Polarization Extinction Ratio | ≥18 dB |
| Switching Extinction Ratio | ≥45 dB |
| Return Loss | ≥40 dB (RF on/off states) |
| Rise/Fall Time | 10 ns |
| Operating RF Frequency | 200 MHz |
| Voltage Standing Wave Ratio | ≤1.5:1 |
| RF Input Impedance | 50 Ω |
| Maximum RF Power | 2.5 W (absolute maximum rating; excessive power will directly destroy the device) |
| Diffraction Frequency Shift | 200 MHz (upshift) |
| Compatible Fiber Model | Fujikura PM980 (SM98- PS-U25A) or equivalent fiber |
| Pigtail Length | ≥1.5 m, covered with a 900μm PVDF protective sleeve |
| Fiber End | Bare fiber |
| Fiber Type | Single-mode （SM） |
Key Features
Datasheet
Supplier Information
Related Products
-
Mid-Infrared Germanium Acousto-Optic Deflector AODF 4050 AODF 4050（锗）
Acousto-Optic Modulator
Sinteclaser
Acousto-optic Medium: Germanium Spectral Range: Far-Infrared Operating Wavelength: 9100 - 9500 nm
The AODF 4050 germanium acousto-optic deflector is designed for mid-infrared laser modulation and beam-control applications in the 9100–9500 nm band. It uses germanium as the acousto-optic interaction material and operates in a compressional acoustic mode. Its optical configuration uses linear horizontal polarization parallel to the base and supports stable operation over an RF frequency range of 40–60 MHz. Low-reflection antireflection coatings provide high transmission within the specified band to reduce optical loss. The AODF 4050 has an 11.6 mm clear aperture, high diffraction efficiency, and defined beam-separation characteristics at 9.4 µm, making it suitable for precision modulation and beam control in mid-infrared laser systems. It is water-cooled and equipped with push-in connectors for integration into high-power laser systems. Model identification: AODF 4050 (germanium) (97-03477-01).
-
Mid-Infrared Germanium Acousto-Optic Deflector AODF 4070 AODF 4070（锗）
Acousto-Optic Modulator
Sinteclaser
Acousto-optic Medium: Germanium Spectral Range: Far-Infrared Operating Wavelength: 9400 nm
The AODF 4070 germanium mid-infrared acousto-optic deflector is designed for beam deflection and scanning in the 9.4 µm band. It uses germanium as the acousto-optic interaction medium and operates in a longitudinal acoustic mode for high-precision mid-infrared beam control. Both input and output polarizations are parallel to the mounting reference plane, supporting stable, predictable integration into 9.4 µm laser systems. The RF system has a center frequency of 70 MHz and a bandwidth of 40 MHz for controlled acousto-optic deflection and scanning. The AODF 4070 uses a four-element phased-array structure with an integrated delay/beam-splitting module to support the required RF drive architecture and coordinated system control. It is water-cooled, has an 11 mm clear aperture and a 68 mrad scan angle, and is suitable for mid-infrared laser beam control, optical scanning, and specialized photonic systems. Model identification: AODF 4070 (germanium) (97-03260-04).
-
Visible Acousto-Optic Deflector AODF 4040
Acousto-Optic Modulator
Sinteclaser
Acousto-optic Medium: TeO₂ Acoustic Mode: Shear, Off-Axis Acoustic Velocity [±1%]: 660 m/sec
The AODF 4040 TeO₂ visible-light acousto-optic deflector is a low-power device for beam deflection and control over460–690 nm. It uses TeO₂ and an off-axis shear-wave acoustic mode. The descriptive text specifies vertical linear input polarization and horizontal linear output polarization for standardized integration and polarization separation. Low RF power requirements at460 nm suit compact beam-control architectures and efficient acousto-optic modulation. The AODF 4040 has a2 ×6 mm clear aperture and stable deflection under the specified minimum-efficiency condition for optical instruments, OEM visible-laser systems, and precision photonic applications. Main features (source table): Model |AODF 4040 (97-03461-01); Medium |TeO₂; Spectral Region |Visible; Operating Wavelength |460–690 nm; Clear Aperture |2 ×6 mm; Center Frequency |40 MHz; Acoustic Velocity |0.66 mm/μs; RF Bandwidth |1 MHz; RF Power |0.1 W; Scan Angle |0.9 mrad; Resolvable Spots |6; Input Polarization |Horizontal; Output Polarization |Vertical; Insertion Loss |<3%; Acoustic Mode |Off-Axis Shear Wave; Minimum Diffraction Efficiency |≥85%; Standing-Wave Ratio |<2.0:1. Official document:visible-light acousto-optic deflector AODF 4040.
-
Visible Acousto-Optic Deflector AODF 4120-2
Acousto-Optic Modulator
Sinteclaser
Acousto-optic Medium: TeO₂ Acoustic Mode: Shear, off axis Acoustic Velocity: .65 mm/μs
The AODF 4120-2 TeO₂ 413 nm visible-light acousto-optic deflector provides precision deflection and scanning of 413 nm visible-laser beams. TeO₂ operates in an off-axis shear-wave acoustic mode. Horizontal linear input and vertical linear output polarization support standardized integration and stable optical paths. Its RF center frequency is 120 MHz, with impedance matching across the operating band for stable RF drive and reliable beam control. The AODF 4120-2 has a large clear aperture, efficient deflection at low RF power, and defined diffraction performance. It serves scientific instruments, OEM photonic systems, and precision visible-laser platforms requiring accuracy and stability. Official document:visible-light acousto-optic deflector AODF 4120-2. Main features (source table): Model |AODF 4120-2 (97-02799-01); Medium |TeO₂; Spectral Region |Visible; Operating Wavelength |413 nm; Clear Aperture |10 mm; Center Frequency |120 MHz; Acoustic Velocity |0.65 mm/μs; RF Bandwidth |50 MHz; RF Power |<1.0 W; Scan Angle |31.8 mrad; Resolvable Spots |130; Input Polarization |Horizontal; Output Polarization |Vertical; Insertion Loss |3%; Acoustic Mode |Off-Axis Shear Wave; Minimum Diffraction Efficiency |≥75%; Standing-Wave Ratio |<2.2:1.
-
Visible Acousto-Optic Deflector AODF 4120-3
Acousto-Optic Modulator
Sinteclaser
Acousto-optic Medium: TeO₂ Acoustic Mode: Shear, off axis Acoustic Velocity: .65 mm/μs
The AODF 4120-3 TeO₂ 413 nm visible-light acousto-optic deflector provides precision deflection and scanning of 413 nm visible beams. TeO₂ operates in an off-axis shear-wave acoustic mode. Horizontal linear input and vertical linear output polarization support standardized path separation and stable integration. The RF center frequency is 120 MHz, with impedance matching across the operating band for stable drive and beam control. The AODF 4120-3 has a compact clear aperture, efficient deflection at low RF power (<0.3 W), and defined diffraction performance. It serves precision small-beam control in scientific instruments, OEM photonic platforms, and specialized laser systems. Official document:visible-light acousto-optic deflector AODF 4120-3. Main features (source table): Model |AODF 4120-3 (97-02799-02); Medium |TeO₂; Spectral Region |Visible; Operating Wavelength |413 nm; Clear Aperture |3 mm; Center Frequency |120 MHz; Acoustic Velocity |0.65 mm/μs; RF Bandwidth |50 MHz; RF Power |<0.3 W; Scan Angle |31.8 mrad; Resolvable Spots |154; Input Polarization |Horizontal; Output Polarization |Vertical; Insertion Loss |3%; Acoustic Mode |Off-Axis Shear Wave; Minimum Diffraction Efficiency |≥75%; Standing-Wave Ratio |<2.2:1.
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform