1064nm(100~300W) Polarization-Maintaining Cladding Stripper -260W
The cladding light stripper removes residual pump light from the outer cladding of double-clad fibers and reflected signal light returning through the inner cladding. In high-power fiber lasers, residual pump light traveling through the outer cladding is ineffective and can damage devices and impair stability. CPS disrupts total internal reflection of cladding light using high-index coatings, surface roughness, or other methods, allowing residual light to leak out without affecting core signal power or beam quality. Note: Wuhan Guanghong Technology Co., Ltd. customizes various cladding strippers.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Pump Wavelength | 800~1000 nm |
| Signal Wavelength | 1064 nm |
| Input Fiber [Original table unit μm] | Nufern-PLMA-GDF-20/400-M-0.06/0.46NA |
| Output Fiber [Original table unit μm] | Nufern-PLMA-GDF-20/400-M-0.06/0.46NA |
| Signal Insertion Loss | 0.2 dB |
| Stripping Efficiency | 17 dB |
| Signal Output Beam M² | 1.2 |
| Stripping Cladding Power | 260 W |
| Operating Temperature | -20~+70 ℃ |
| Storage Temperature | -40~+85 ℃ |
| Fiber Length | 1.0 m |
| Dimensions [Handling power is different with PKG] | 120 mm × 30 mm × 20 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Single-Channel 4K Ultra-HD H.265 Encoder Module E-UD-0111-00-01
Communications & Energy
Prevail-catv
Input Interface - Type 1 [One Primary and One Backup]: HDMI*2 Input Interface - Type 2: Digital Audio (SPDIF) Input Interface - Type 3: Analog Audio
-
IP Switch WS-IP
Communications & Energy
Prevail-catv
WS-IP Professional Broadcast IP Switcher,Years of Development/Improvement,Excellent Performance,Meets Relevant National Standards.
-
Enhanced SDH/POS Network Traffic Splitter / Network Traffic Replicator / Network TAP Switch RD-TAP-48P
Communications & Energy
Fiberwdm
Service Interface (POS): 24 Receivers for155M/622M/2.5G/10G POS and10G WAN;Each POS Rate Independently/Dynamically Switchable Service Interface (ETH): 24 10GE/1GE Transmit/Receive Channels Throughput (*) [Functions Listed Are a Collection; Functions and Interface Specifications Customizable by Scenario, Including but Not Limited to Those Listed]: 480Gbps
Enhanced SDH/POS Tap Converts to Ethernet,Flexible Efficient Collection/Filtering/Aggregation/Distribution/Load Balance/Replication for Traffic Control,Backup,Security.
-
6-Electrical-Port POE Gigabit Industrial Switch FW304GPS-2G
Communications & Energy
Fiberwdm
Network Interface: 6 10/100/1000M RJ45 Ports Performance Specifications: MAC address table: 2k; backplane bandwidth: 12Gbps; packet forwarding rate: 8.9Mpps; forwarding mode: store-and-forward Power Supply Support: Maximum Output Power: 30W; Voltage Input: 48-56V DC; Input Method: Pluggable 5-Pin Terminal with 5.08mm Pitch
FW304GPS-2G is a quasi-industrial all-Gigabit managed PoE switch with six10/100/1000M adaptive RJ45 ports;the description also specifies two10/100/1000M RJ45 uplinks. All ports support6KV lightning protection,with supply overtemperature/overvoltage and surge-current protection. IEEE802.3x full-duplex and half-duplex backpressure flow control are supported. IEEE802.3af/at provides up to30W PoE per port. Reliable protection suits complex environments. Redundant48–56VDC dual inputs support dual-DC or the stated dual-DC/AC redundant supply arrangements.
-
Broadband PON Network Single-Line Dual-Access Equipment FW-P801
Communications & Energy
Fiberwdm
Insertion Loss [Paired Single-Line Dual-Access Equipment; PDF Page 2 Product Features]: <1.6 dB
Single-Fiber Residential Drop Supports Multiple Broadband Services per User/Tenants or Fast Network Migration before Expiry,Avoids Second Entry Cable/Uses Existing Drop for Fast Installation.
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
Loading...
Name
Phone
Organization
Use Case
Database Platform