CaF2 Windows

CaF2 Windows

Supplier
Dientech
Category
Optical Windows
Origin
China

Calcium Fluoride has widespread IR application as spectroscopic CaF2 windows, CaF2 prisms and CaF2 lenses. Especially pure grades of Calcium Fluoride (CaF2) find useful application in the UV and as UV Excimer laser windows. Calcium Fluoride (CaF2) is available doped with Europium as a gamma-ray scintillator and is harder than Barium Fluoride. Calcium Fluoride can be used for many applications, including vacuum ultra violet, ultra violet and infrared thermal imaging. Calcium fluoride is traditionally used in apochromatic design to reduce light dispersion in lenses, both in cameras and telescopes, and has uses in the oil and gas industry as a component in detectors and spectrometers. Primarily used in spectroscopic windows, as well as in thermal imaging and other systems where high transmission between 0.2µm and 8µm is required, calcium fluoride is attacked by few reagents and offers a low absorption coefficient and high damage threshold, beneficial in its use in excimer laser systems. Calcium Fluoride is used in spectroscopy systems for beam steering and focussing. The CaF2 lenses and windows offer over 90% transmission from 350nm through to 7µm and are used in spectrometer systems where a broad wavelength range is required. Calcium Fluoride's low index of refraction allow Calcium Fluoride to be used in systems without the use of antireflection coatings, unlike other IR materials. Diameter: 1 - 450mm Thickness: 0.07 - 50mm Tolerances: ±0.02mm Surface Quality: 10/5 Scratch/Dig Flatness: λ/8 Parallelism: 5" Centration: 10"

Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

Calcium Fluoride has widespread IR application as spectroscopic CaF2 windows, CaF2 prisms and CaF2 lenses. Especially pure grades of Calcium Fluoride (CaF2) find useful application in the UV and as UV Excimer laser windows. Calcium Fluoride (CaF2) is available doped with Europium as a gamma-ray scintillator and is harder than Barium Fluoride. Calcium Fluoride can be used for many applications, including vacuum ultra violet, ultra violet and infrared thermal imaging. Calcium fluoride is traditionally used in apochromatic design to reduce light dispersion in lenses, both in cameras and telescopes, and has uses in the oil and gas industry as a component in detectors and spectrometers. Primarily used in spectroscopic windows, as well as in thermal imaging and other systems where high transmission between 0.2µm and 8µm is required, calcium fluoride is attacked by few reagents and offers a low absorption coefficient and high damage threshold, beneficial in its use in excimer laser systems. Calcium Fluoride is used in spectroscopy systems for beam steering and focussing. The CaF2 lenses and windows offer over 90% transmission from 350nm through to 7µm and are used in spectrometer systems where a broad wavelength range is required. Calcium Fluoride's low index of refraction allow Calcium Fluoride to be used in systems without the use of antireflection coatings, unlike other IR materials. Diameter: 1 - 450mm Thickness: 0.07 - 50mm Tolerances: ±0.02mm Surface Quality: 10/5 Scratch/Dig Flatness: λ/8 Parallelism: 5" Centration: 10"

Specifications

ParameterValue
Transmission Range [IR grade will have restricted performance outside IR range]0.13 to 10 μm (Note: IR grade will have restricted performance outside IR range)
Refractive Index [5 μm]1.39908 at 5 μm
Reflection Loss [5 μm]5.4% at 5 μm
Absorption Coefficient [2.7 μm]7.8 x 10⁻⁴ cm⁻¹ @ 2.7 μm
Reststrahlen Peak35 μm
dn/dT-10.6 x 10⁻⁶/°C
dn/dμ = 01.7 μm
Density3.18 g/cc
Melting Point1360°C
Thermal Conductivity9.71 W m⁻¹ K⁻¹
Thermal Expansion18.85 x 10⁻⁶/°C
Hardness [(100);500g indenter]Knoop 158.3 (100) with 500g indenter
Specific Heat Capacity854 J Kg⁻¹ K⁻¹
Dielectric Constant [1MHz]6.76 at 1MHz
Youngs Modulus (E)75.8 GPa
Shear Modulus (G)33.77 GPa
Bulk Modulus (K)82.71 GPa
Elastic CoefficientsC₁₁ = 164 C₁₂ = 53 C₄₄ = 33.7
Apparent Elastic Limit36.54 MPa
Poisson Ratio0.26
Solubility [water;20°C]0.0017g/100g water at 20°C
Molecular Weight78.08
Class/StructureCubic Fm3m (#225) Fluorite Structure. Cleaves on (111)

Datasheet

Product Datasheet
PDF
Download

Supplier Information

Di
Dientech
View Supplier →
Chengdu Dien Photoelectric Technology Co., Ltd. is an energetic young crystalline materials technology company, specializing in the research, design, manufacture and sales of a series of nonlinear optical crystals, laser crystals, magneto-optic crystals and substrates. With excellent quality and competitiveness, the products are widely used in scientific research, beauty and industrial markets. The company has an experienced sales and engineering team dedicated to providing customized application solutions for customers in the global beauty, industrial and scientific research fields. The products meet European and world standards. Headquartered in Chengdu, China, DIEN TECH has customers all over the world, including the USA, Europe and Asia. DIEN TECH is committed to becoming one of the most reliable and high-quality photoelectric component suppliers in the world.

Request a Quote

Our team responds within 24–48 hours
CaF2 Windows
Dientech · Optical Windows
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →