YAG Crystal AR Coated Optical Rod Lenses for Laser Device X-P22L5M12001B
Nd:YAG (neodymium-doped yttrium aluminum garnet; Nd:Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, triply ionized neodymium, Nd(III), typically replaces a small fraction (1%) of the yttrium ions in the host crystal structure of the yttrium aluminum garnet (YAG), since the two ions are of similar size.[1] It is the neodymium ion which provides the lasing activity in the crystal, in the same fashion as red chromium ion in ruby lasers. Material: Nd(Ce)YAG Cr:YAG Dimension: Dia. 3.00mm Thickness: 55.00mm Tolerance : +/-0.10mm Nd:YAG Rods Neodymium doped Yttrium Aluminum Garnet (Nd:YAG) is the most commonly employed solid state lasing medium for material processing applications. Nd:YAG has relatively good optical absorption and conversion efficiency, low lasing threshold and good thermal dissipation for high power operation. Nd:YAG (neodymium-doped yttrium aluminum garnet; Nd:Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, triply ionized neodymium, Nd(III), typically replaces a small fraction (1%) of the yttrium ions in the host crystal structure of the yttrium aluminum garnet (YAG), since the two ions are of similar size. It is the neodymium ion which provides the lasing activity in the crystal, in the same fashion as red chromium ion in ruby lasers. YAG laser optically pumped by Xenon or Krypton lamp Capabilities of YAG crystal VY Optoelectronics Co.,Ltd can produce • Rod size: 3- 30mm in diameter and 1 – 300mm in length; Slabs: （3-50）mm Length *（3-8）mm Width *（30-200）mm Height • Nd dopant concentration : 0.3% – 1.1%; • Polishing; • AR-coating or/and dichroic coating; Advantage of Nd:YAG Crystal During the last decade, Nd:YVO4 has been developed as a promising substitutes for Nd:YAG in diode-pumped lasers due to its high absorption and emission cross-sections. However, the applications of Nd:YVO4 are limited due to its poor physical-mechanical properties and growth difficulty etc. Now, we have developed the high-doped Nd:YAG (SUPER-Nd:YAG) recently. It shows high absorption cross-section and have many advantages over Nd:YVO4: • Due to the cubic symmetry and high quality, Nd:YAG is easy to operate with TEMoo mode • Nd:YAG can be Q-switched with Cr4+:YAG directly • Nd:YAG can produce blue laser with the frequency-doubling of 946nm • Nd:YAG can be operated in a very high power laser up to kW level Nd:YAG rods video display The high neodymium-ion doped YAG has been grown by the novel technique-Temperature Gradient Technique (TGT). The Nd concentration can be doped up to 3%. As large as 100x80mm bulk crystals with excellent optical homogeneity, less scattering particles, low dislocation density have been obtained. Neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal can excites pulsed laser or continuous laser. The emitted laser is infrared wavelength 1.064μm. The superior basic properties make it often used in Near-far infrared lasers, frequency-doubled and triple-frequency, Nd:YAG are widely used in scientific research, medical, industrial and military lasers. Property of Nd:YAG laser VY Optoelectronics Co.,Ltd. can also produce YAG single crystal products, CTH: YAG, Er:YAG, Ho:YAG, Yb:YAG, Undoped YAG and so on, with the maximal diameter of 4-6 inches, as well large-size magneto-optical single crystal TGG and TSAG . We can provide the various special crystal rods, large-size and high-concentration laser crystal slab, crystal substrates, and other special products under the requirements of the customers.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dopant Concentration Nd Dopant Concentration | Nd: 0.3-1.1at% |
| Crystal Orientation Orientation [within±5°] | <111> within±5° |
| Product Dimensions Size | Rods: Diameter（3-30）mm, length≤ 300mm; Slabs: （3-50）mm*（3-8）mm*（30-200）mm; Also customized according to customer requirements |
| Interference Fringe [632.8nm] | ≤1/8λ/inch@632.8nm |
| Extinction Ratio Extinction Ratio | ≥28db |
| Dimensional Tolerance | Diameter :0/-0.05mm, Length : +/-0.5mm, Diameter: 0/-0.05mm,Length: +/-0.5mm |
| Parallelism Ends parallel Parallelism | ≤ 10″ |
| Perpendicularity Perpendicularity to rod axis | ≤ 5′ |
| Flatness [632.8nm] | ≤λ/10 @632.8nm |
| Surface Finish Surface Quality [MIL-O-13830A] | 10-5 (MIL-O-13830A) |
| Chamfer | 0.1±0.05mm*45° |
| Coating [AR-Coating:1064nm；HR-Coating:1064nm and 808nm] | AR-Coating Coating Reflectivity: R≤0.2%@1064nm, HR- Coating Coating Reflectivity: R>99.8%@1064nm and T>95%@808nm |
| Coating Laser Damage Threshold | ≥800MW/cm2 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Er:Yb:Glass+Co:spinel
Laser Crystals
Xkpho
Material: Er:Yb:Glass+Co:MgAl2O4 Dimension: 0.9 mm × 0.9 mm × 3.7 mm Pumping: 915-955nm
-
Nd:YVO4
Laser Crystals
Xkpho
Atomic Density [Nd1.0%]: 1.26x1020 atoms/cm3 (Nd1.0%) Crystal Structure: Zircon Tetragonal, space group D4h-I4/amd a=b=7.1193A,c=6.2892A Density: 4.22g/cm3
Nd:YVO4 is one of the most promising commercially available diode pumped solid state laser materials. It has high laser induced damage threshold and good mechanical in addition to optical properties. Its large stimulated emission cross-section and high absorption of pump laser make it a right crystal for pocket laser. Nd: YVO4 can produce IR green and blue laser by using minor different set-up. A broad absorption band centered at 808nm and favorable mechanical properties make Nd:YVO4 well suited for compact, efficient, high power diode-pumped lasers. Natural birefringence gives rise to a highly polarized output at 1064.3 and 1342nm.
-
Titanium Sapphire Tunable Laser LX329
Laser Crystals
Antelaser
Maximum Pumping Energy: 110 mJ Repetition Rate: 10-30 Hz Harmonizing Range , nm / Base frequency: 700…980
-
LSX-213 G2+ Nd：YAG Laser Ablation System
Laser Crystals
Hl-instruments
Laser Source: Five times. 213nm Q-switched Control Nd：YAG Solid Laser Source Laser Energy: ＞4mJ/pluse Pulse Width: ＜5ns
LSX-213 G2+ Optimized optical design using state-of-the-art technology 。 Use leather for durable use 、 And many harsh tests. LSX-G2 Platform ， Provide super-stabilized optical performance and job stability 。 Provide all performance indicators required for routine analysis ， Low operating cost ， Easy to maintain 。 LSX-213 G2+ It's a closed-in. Pumping Lights and MIL One. SPEC Standard Designed and made. Laser Source ， It's a super-stabilized operation. Laser Energy and minimal maintenance costs 。 It's ready. High Precision After the independent seismic optical platform ，LSX-213 G2+ Multiple sample analysis in multiple demanding environments 。 LSX-213 G2+ High performance hardware and high performance hardware with the latest technology High Precision Optical component design manufacture ， It provides excellent optical resolution. ， Achieving clear observations with a broad vision 。 Quality equipped 、 Multi-array and Brightness Adjustable Transmitting and reflecting lighting systems ， Make sure you can also see the samples clearly at a very large multiplication. 。 LSX-213 G2+ A concise and practical structural design ， Not only provide stable performance ， It's also very easy to maintain. 。 Designed using open sample pool location ， It's a multi-species pool. ， and support users Custom Sample pool 。 Software Control Internal Aperture Auto Switch ， Ripping the dot diameter range 4μm One. 200μm； System realization and ICP Two-way communications ， Real time energy adjustment 、 Parameters such as dot size and scan speed ；CETAC The product facilitates your efficient work process ， Achieving a fixed point —— Erosion —— Three step objectives of analysis 。
-
Titanium Doped Sapphire
Laser Crystals
Rsgx
Ti203 Concentration: 0.06~0.5wt% Figure of Merit: 100~300 mm Dimension: 2~50 mm
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform