BBO Pockels Cell OCP-4-2055-24K-7-1D
EOM

BBO Pockels Cell OCP-4-2055-24K-7-1D

Supplier
Opticrystal
Part Number
OCP-4-2055-24K-7-1D
Category
EOM
Origin
China

Compared with the traditional KD*P electro-optic modulation crystal, BBO (barium metaborate β-BaB2O4) crystal has the advantages of extremely low absorption coefficient, weak piezoelectric ringing effect, wider spectral transmission range (210-2000nm), etc. . Compared with RTP electro-optic modulation crystals, BBO crystals have higher extinction ratio, anti-damage threshold and temperature adaptability, which is beneficial to improve the stability of laser output power. Therefore, electro-optic Q-switches made of BBO crystals are often used in high-repetition frequency (1MHz), high-power (up to 1000W) electro-optic Q -switched solid-state lasers, cavity-inverted air-conditioned Q lasers, and all-solid-state picosecond and femtosecond regenerative amplification. in the laser system. Without water cooling, the BBO electro-optic Q-switch can be turned off and withstand intracavity oscillation optical power up to 150W (laser output power up to 50W). The disadvantage of BBO crystals is that the electro-optic coefficient is small and the half-wave voltage is relatively high. Therefore, the half-wave voltage and quarter-wave voltage can be reduced by increasing the crystal length and using two BBO crystals in series.

Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

Compared with the traditional KD*P electro-optic modulation crystal, BBO (barium metaborate β-BaB2O4) crystal has the advantages of extremely low absorption coefficient, weak piezoelectric ringing effect, wider spectral transmission range (210-2000nm), etc. . Compared with RTP electro-optic modulation crystals, BBO crystals have higher extinction ratio, anti-damage threshold and temperature adaptability, which is beneficial to improve the stability of laser output power. Therefore, electro-optic Q-switches made of BBO crystals are often used in high-repetition frequency (1MHz), high-power (up to 1000W) electro-optic Q -switched solid-state lasers, cavity-inverted air-conditioned Q lasers, and all-solid-state picosecond and femtosecond regenerative amplification. in the laser system. Without water cooling, the BBO electro-optic Q-switch can be turned off and withstand intracavity oscillation optical power up to 150W (laser output power up to 50W). The disadvantage of BBO crystals is that the electro-optic coefficient is small and the half-wave voltage is relatively high. Therefore, the half-wave voltage and quarter-wave voltage can be reduced by increasing the crystal length and using two BBO crystals in series.

Specifications

ParameterValue
BBO dual crystal switch-Clear Aperture3.7 mm
BBO dual crystal switch-Crystal size4 mm × 4 mm × 20 mm
BBO dual crystal switch-Shell sizeD20x55
BBO dual crystal switch-λ/4 voltage(@ 1064 nm) kV DC [@ 1064 nm;@ 1064 nm) kV DC]2.4kV
BBO dual crystal switch-Capacitance7pF
BBO dual crystal switch-Transmittance>99%
BBO dual crystal switch-Extinction Ratio5 00:1
BBO dual crystal switch-Application wavelength range1030nm-1064nm
BBO dual crystal switch-damage threshold600MW/cm 2 @ 10ns 10Hz @ 1064nm

Key Features

High repetition rate and damage resistance low absorption and noise High UV transmittance

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Op
Opticrystal
View Supplier →
Shanghai Opticrystal Materials Co., Ltd. was founded in 2014, mainly engaged in R&D, processing and sales of optical crystals, electronic and semiconductor materials, laboratory equipment, spare parts, consumables and other products. The products are widely used in laser processing, new energy vehicles, photovoltaic, optical communication, aerospace, shipbuilding, nuclear detection, medical beauty, consumer electronics, power, environmental protection, scientific research and other fields, and are exported to Europe, America, Southeast Asia and other regions. The company has a professional R&D, processing and sales team, adhering to the principle of "customer-centric, quality first, high-quality service", providing high-quality products and one-stop overall solutions, continuously improving service quality and customer satisfaction, and working together with customers for common development.

Request a Quote

Our team responds within 24–48 hours
BBO Pockels Cell OCP-4-2055-24K-7-1D
Opticrystal · EOM
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →