Cube Beam Splitter
Dichroic prism Cube beam Compared with the flat beam splitter, the splitter has the same path length of reflected and transmitted light. The cubic beamsplitter prism is coated with a layer of film on the slope of the right-angle prism, and then glued together with a similar right-angle prism to form a cubic beamsplitter. The astigmatism of the flat beam splitter can be avoided, the coating is not directly exposed, and it is not easy to be damaged and corroded. A polarizing beamsplitter is an optical element that splits a beam of incident light into two beams of light whose propagation directions are perpendicular to each other, while a depolarizing beamsplitter splits the incident light according to a calibrated splitting ratio without changing the polarization state of the incident light. are the transmitted and reflected beams. Shanghai Optics produces high-precision beam-splitting prisms, including single-wavelength or broadband polarization beam-splitters, high-power polarization beam-splitters (PBS) and depolarization beam-splitters (NPBS) .
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | K9, fused silica, ZF glass |
| Dimension Tolerance | ±0.2 mm |
| Extinction Ratio | Single wavelength>2000:1, high power single wavelength >2000:1 broadband >1000:1, high power broadband >1000:1 |
| Surface Quality | 40/20, 20/10 |
| Beam Deviation | < 3′ |
| Face Flatness [@633nm] | λ /4 @633nm |
| Through the parameter Transmission | Single wavelength: Tp ＞ 98%, broadband: Tp ＞ 97% |
| Effective aperture Clear Aperture | > 85 % |
| Damage Threshold [@1064 nm, 20 ns, 20 Hz] | ＞ 15 J/cm2 @1064 nm, 20 ns, 20 Hz |
| Coating wavelength | Narrowband: 450, 532, 632, 808, 980, 1064, 1310, 1550nm Broadband: 450-650, 650-900, 900-1200, 1200-1600nm |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
General-purpose beamsplitter plate
Beam Splitters
Tzjingda
Material: K9 or other optical materials Clear Aperture Dimension: >90 % Parallelism [Up to the stated maximum; Actual specification according to customer requirements]: ≤1 ″
-
Narrowband non-polarizing beamsplitter plate
Beam Splitters
Tzjingda
Material: K9 Clear Aperture Dimension: >90 % Surface Figure [Standard; 632.8nm; Per 25mm; Actual specification according to customer requirements]: λ/4
-
Visible and near-infrared beamsplitter plate Beam Splitters Uni-lens
Material: BK7, fused silica, boron float glass, etc. Dimensional Tolerance: ±0.1 mm Surface Figure [633nm]: λ/4
These beamsplitter plates can be used in high-power laser systems. The two beams travel along different optical paths determined by the incidence angle and plate thickness.
-
Beamsplitter Beam Splitters 100optics
Material: K9 or ZF glass Dimensional Tolerance: ±0.2 mm Surface Quality: 60 / 40
A polarizing cube beamsplitter separates a randomly polarized beam into two orthogonal linearly polarized components: S polarization is reflected at 90 degrees, while P polarization is transmitted. Each consists of a pair of high-precision, high-tolerance right-angle prisms bonded with a dielectric coating on the hypotenuse of one prism. Baijing Optoelectronics offers high-quality beamsplitters.
-
Non-polarizing beamsplitter (NPBS) Beam Splitters 100optics
Material: K9 or ZF glass Dimensional Tolerance: ±0.2 mm Surface Quality: 60 / 40
Made by bonding two precision, high-tolerance right-angle prisms, with a metal-dielectric coating on the hypotenuse of one prism. The coating has low polarization dependence, keeping S- and P-polarized transmission and reflection within 6% of one another. The source states that the incident polarization is therefore unchanged.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform