400G QSFP112 AOC TSBSB-85R-XXXC
Multi-mode 850nm 400G OSFP112 Active Optical Cable, With Diagnostic Monitoring • Hot-pluggable OSFP form factor • Data Rate 106.25 Gb/s PAM4 per lane • 4x106Gbps PAM4 transmitter and PAM4 receiver • 4 channels 850nm VCSEL array and PIN photo detector array • Power consumption < 10W per end • CMIS V5.1 compliant • Operating case temperature: 0 ℃ ~+70 ℃ • RoHS6 compliant (lead free)
Specification Snapshot
Wavelength
850 nm
Power consumption [per end]
<10 W
Cable length [Ordering XXX=001–030;OM3 MMF]
1–30 m
Power Supply Voltage VCC [Absolute Maximum Ratings]
−0.5 to +3.6
Storage Temperature Tc [Absolute Maximum Ratings]
−40 to +85
Power Supply Voltage VCC [Recommended Operating Environment]
typical:3.30 V
Request a Quote
Download Datasheet
Overview
Multi-mode 850nm 400G OSFP112 Active Optical Cable, With Diagnostic Monitoring • Hot-pluggable OSFP form factor • Data Rate 106.25 Gb/s PAM4 per lane • 4x106Gbps PAM4 transmitter and PAM4 receiver • 4 channels 850nm VCSEL array and PIN photo detector array • Power consumption < 10W per end • CMIS V5.1 compliant • Operating case temperature: 0 ℃ ~+70 ℃ • RoHS6 compliant (lead free)
Specifications
| Parameter | Value |
|---|---|
| Nominal data rate | 400 Gb/s |
| Wavelength | 850 nm |
| Data rate per lane [PAM4] | 106.25 Gb/s |
| Transmitter/Receiver | 4×106Gbps PAM4 transmitter and PAM4 receiver |
| Optical channels [850 nm VCSEL array and PIN photo detector array] | 4 |
| Power consumption [per end] | <10 W |
| Compliance | CMIS V5.1; RoHS6 (lead free) |
| Fiber type | OM3 multimode fiber |
| Cable length [Ordering XXX=001–030;OM3 MMF] | 1–30 m |
| Electrical connector | 60 contacts edge type connector |
| Power Supply Voltage VCC [Absolute Maximum Ratings] | −0.5 to +3.6 |
| Storage Temperature Tc [Absolute Maximum Ratings] | −40 to +85 |
| Relative Humidity RH [Absolute Maximum Ratings;non-condensing] | 15–85 % |
| Power Supply Voltage VCC [Recommended Operating Environment] | typical:3.30 V |
| Power Supply Voltage VCC [Recommended Operating Environment] | 3.15–3.45 V |
| Operating Case Temperature Tca [Recommended Operating Environment] | 0–70 °C |
| Differential Input Voltage Amplitude Vin [Measured between TxnP and TxnN] | 300–1100 mV |
| Differential Output Voltage Amplitude Vout [Measured between RxnP and RxnN] | 300–900 mV |
| Differential termination mismatch | ≤10 % |
| Skew | ≤300 ps |
| Bit Error Rate BER [PRBS31 @53.125Gbps;Pre-FEC] | ≤2.4×10⁻⁴ |
| Input Logic Level High VIH | 2.0 to VCC |
| Input Logic Level Low VIL | 0–0.8 V |
| Output Logic Level High VOH | VCC−0.5 to VCC |
| Output Logic Level Low VOL | 0–0.4 V |
| Length tolerance [L≤1 m] | +70/−0 |
| Length tolerance [1 m<L<7 m] | +100/−0 |
| Length tolerance [L≥7 m] | +2% L/−0 |
Applications
• 400G Ethernet • Switch & Router Connections
Datasheet
Product Datasheet
PDF
Supplier Information
Founded in 2000 and listed on the ChiNext of Shenzhen Stock Exchange in 2016, T&S Communications is a national high-tech enterprise focusing on the R&D, production and sales of core optical communication components and integrated functional modules. As a globally leading manufacturer of MTP/MPO high-density optical fiber connectors and one of the world's largest manufacturers of ceramic ferrules, the company's products are widely used in large and ultra-large data centers, cloud computing platforms, AI training clusters, telecommunication networks and next-generation intelligent computing infrastructure in North America and Europe, continuously providing high-quality optical connection products and solutions to global leading cloud service providers, equipment manufacturers and data center operators.
The company has a rich product line, covering passive optical components such as high-density optical fiber connectors, conventional optical fiber connectors, PLC splitters, and wavelength division multiplexers, active optical components such as high-speed optical modules and active optical cables, as well as key basic components such as ceramic ferrules, MT ferrules, planar lightwave circuit wafers and chips.
T&S Communications has three subsidiaries: Hechuan Powder, Ruixinyuan, and Tesilu Precision, and has established a production base in Vietnam. Relying on the "Guangdong Provincial Optical Fiber Sensing (T&S Communications) Engineering Technology Research Center", the company actively promotes the large-scale application of optical fiber sensing technology in fields such as electric power, transportation, energy, and infrastructure. Looking to the future, T&S Communications closely follows the development trends of ultra-high computing power and the Internet of Everything, focusing on cutting-edge businesses such as high-density optical interconnection, CPO (Co-Packaged Optics) and optical fiber sensing, and is committed to building a high-density, high-speed, intelligent "optical communication + optical sensing" product system, providing global customers with reliable and forward-looking products and solutions.
Contact Us
Loading...
GetExperimental Plan
Name
Phone
+86
Organization
Use Case

Global Photonics Products
Database Platform
Database Platform
With 16 years of experience, we provide high-quality products and services to universities, research institutes, and industry.
50+ Detailed Categories · 3,000+ Global Brands · 100,000+ Photonics Products
1 Million+
In-depth analysis of professional academic resources in photonics
300,000
ProductsDatasheets Available Free
We will keep your personal information strictly confidential.
Product Quote
+86
* Select the quoting party:
By submitting, you agree to the User Service Agreement and Privacy Policy