MOPA-Type High-Power SLD Broadband Light Source

MOPA-Type High-Power SLD Broadband Light Source

Supplier
Shconnet
Category
Superluminescent Diodes
Origin
China

The source describes the ultrathin MOPA-SLD-850 as an SLD-based high-power source with10mW power and very low sensitivity to optical feedback,using a master-oscillator power-amplifier(MOPA) arrangement.

Specification Snapshot
Spectral Ripple
< 2%
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

The source describes the ultrathin MOPA-SLD-850 as an SLD-based high-power source with10mW power and very low sensitivity to optical feedback,using a master-oscillator power-amplifier(MOPA) arrangement.

Specifications

ParameterValue
Center Wavelength850±2 nm
Optical Bandwidth (FWHM)10-20 nm
Spectral Ripple< 2%
Output Power50 mW (45 mW min.)
Maximum Allowed Feedback-10 dB (corresponds to 10%-feedback)
Ouput Power Stability< 0.5%
Polarization Extinction Ratio> 18 dB (20 dB typ.)
Optical Fiber TypeCorning PANDA PM 850
Polarization Orientation in the Output FiberSlow axis, Aligned with the connector key
Output Optical ConnectorFC/APC type with narrow precision key (2.0 mm)
Operating Mode, for SLD / SOAConstant Power
Enable Control1) Manual: from the front panel 2) Electronical via: a) TTL pulses, b) RS-232 port
Modulation InputTTL, 0 – 5 V => Full Power – 0, R_IN=1 kOhm
Rise Time / Fall Time2 μs / 0.5 μs
Modulation Input ConnectorSMA-female (Referenced to Chassis)
I/O InterfaceRS-232
SLD Protective MeasuresSoft start of the SLD pumping current, clamping limit circuit for the SLD current, SLD operation in constant power mode, fast switch off of an SLD module in case of a driver error, effective suppression of electronic transients and spikes.
Built-in Laser Safety MeasuresKey-operated master control, remote interlock connector, manual reset in case of remote interlock activation, visual indication of laser output activation, laser safety information labels.
Power Requirements110 VAC, 50-60 Hz
Power Consumption20 VA Max
Warm-up Time10 min
Operating Temperature Range+15 °C to + 30 °C
Storage Temperature Range0 °C to +40 °C
Continuous Operation16 hrs/day
Outline Dimensions (W × H × D)257 mm × 170 mm × 325 mm
Approximate Weight7 kg
Warranty12 months

Key Features

The seed SLD supplies6-10mW over10-20nm width,centered850nm. After isolation>25dB,a spectrally matched SOA amplifies the light; the source literally gives its raised power as50MW(50兆瓦),retained without changing the unit. A6-10mW input can drive deep SOA saturation,reducing feedback sensitivity and avoiding an output isolator and its insertion loss,often2dB. Only PM fibers are used,no SM-fiber coupling elements. Most components use fast-axis blocking,providing output polarization extinction ratio>18dB. The source refers to a simplified MOPA block diagram; no diagram content is read.

Datasheet

Product Datasheet
PDF
Download

Supplier Information

Sh
Shconnet
View Supplier →
Shanghai Connet Fiber Communication Technology Co., Ltd. was founded in 2003 and is a high-tech enterprise specializing in the research, development, and production of laser light sources, fiber lasers, fiber amplifiers, and related products. Currently, the company has formed four major series of products led by laser light sources, fiber lasers, fiber amplifiers, and fiber gratings, including laser light sources of various wavelengths, single-frequency lasers, high-power fiber amplifiers, single-frequency polarization-maintaining fiber amplifiers, continuous and pulsed fiber lasers, high-power fiber gratings, phase-shifted gratings, chirped gratings, and other related products, providing innovative products and solutions for the research and development of high-performance fiber lasers, LiDAR, fiber sensing, fiber communication, test and measurement, scientific research, and other fields. Shanghai Connet is committed to continuously providing globally leading technologies and products, serving fields including: special fiber applications, fiber laser research and industrialization, fiber sensing and fiber optic gyroscope research, LiDAR applications, and laser industrial applications. The philosophy of Shanghai Connet Fiber Communication Technology Co., Ltd. is: continuously introducing globally leading technologies and products, and fully providing support and assistance to domestic users. After years of accumulation and development, the company has formed a series of products led by single-frequency fiber lasers, pulsed fiber laser light sources, high-power fiber amplifiers, and special fiber lasers, providing innovative product solutions for LiDAR, fiber sensing, coherent and spectral synthesis, research, testing and measurement of high-performance fiber lasers, spectral analysis, fiber communication, and other fields. Shanghai Connet Laser Technology Co., Ltd. is a wholly-owned subsidiary of Shanghai Connet Fiber Communication Technology Co., Ltd. It is a high-tech enterprise specializing in the research, development, and production of laser light sources, fiber lasers, fiber amplifiers, and related products, founded in 2007. Since its establishment, Shanghai Connet Laser Technology Co., Ltd. has been guided by technological innovation, committed to providing products and services representing cutting-edge technology and future development trends for scientific research and production applications in industrial lasers, LiDAR, fiber sensing, fiber communication, and other fields. After years of accumulation and development, the company has formed three major series of products led by laser light sources, fiber lasers, and fiber amplifiers, including laser light sources of various wavelengths, high-power fiber amplifiers, single-frequency polarization-maintaining fiber amplifiers, continuous and pulsed fiber lasers, and other related products, providing innovative product solutions for the research and development of high-performance fiber lasers, test and measurement, spectral analysis, coherent synthesis, LiDAR, fiber sensing, fiber communication, and other fields. "Looking to the future, pursuing quality; independent innovation, striving for excellence" is the development philosophy that Shanghai Connet Laser Technology Co., Ltd. has adhered to since its founding. We take quality pursuit as the core, rely on a professional R&D team and advanced concepts, continuously develop and innovate, strive for excellence, and shoulder social responsibility, seeking long-term development.

Request a Quote

Our team responds within 24–48 hours
MOPA-Type High-Power SLD Broadband Light Source
Shconnet · Superluminescent Diodes
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →