Polyimide Fiber Recoater with Linear Tensile Testing PRL201
Thorlabs’ Vytran® polyimide recoater with proof tester provides a simple integrated solution for recoating and testing spliced fibers. A translating die applies polyimide resin along a recoating region up to 50mm long. One pass applies a resin coating with a diameter of Ø3µm-Ø10µm, and multiple passes produce more robust coatings with larger diameters. The process is fully programmable: parameters such as injection rate and die speed set the coating diameter for each pass. Two heating filaments in the die thermally cure the coated fiber section during each pass. After the buffer is restored, the fiber has the same flexibility as when originally manufactured, making the unit suitable for applications involving handling and coiling spliced fibers.
Overview
Specifications
| Parameter | Value |
|---|---|
| Recoater Type | Automatic Polyimide |
| Recoater Die | Designed for Ø125 µm Cladded Fibersb |
| Recoat Diameter [Programmable / Based on Number of Coating Layers] | ≤155 µm, Programmable |
| Maximum Recoat Length | 50 mm (2") |
| Recoat Material | Thermal Cure Polymide |
| Thermal Source | Dual Filament Heaters |
| Recoat Injection | Automatic |
| Total Cycle Time | typical:2 - 7 min (Typical) |
| Dimensions (L × W × H) | 10.25" × 7.0" × 5.0" (260 mm × 178 mm × 127 mm) |
| AC Power [AC / 47-63 Hz] | 110 - 120 V / 200 - 240 V, 47-63 Hz |
| AC Power [AC / Input Frequency] | 47-63 Hz |
| Load Mechanism | 1.5" (38 mm) Linear Fiber Clamp |
| Fiber Spacing | 3.7" (94 mm) |
| Maximum Load [for a Ø125 µm Fiber] | 20 N (4.5 lbs) |
| Maximum Load [for a Ø125 µm Fiber] | 235 kpsi (1.6 GPa) |
| Accuracy | ±2% |
| Ramp Rate | 22 N/s (5 lbs/s), Programmable |
| Hold Time [Programmable, With Handheld Controller] | 0.00 s - 9.99 s, Programmable |
| Display Units | lbs, kg, N, kpsi, and GPa |
Key Features
Datasheet
Supplier Information
Loading...
Name
Phone
Organization
Use Case

Database Platform