Precision motorized lift stage STOM-MMLS50
These precision motorized lifting stages use precision-ground stainless-steel screws, linear guides, crossed-roller guides and high-speed, high-torque stepper motors. They offer smooth, quiet motion, efficient transmission, high accuracy, repeatability, durability and reliability. Standard products provide different travels, resolutions, loads and leads. Optical or magnetic linear encoders can be added for closed-loop feedback.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Travel [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 50 mm |
| Tabletop dimensions [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 150 mm × 150 mm |
| Drive mechanism [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | Ball screw |
| Guideway type [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | Linear guideway |
| Stepper motor [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | Two-phase four-wire stepper motor |
| Main body material [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | Aluminum alloy |
| Surface Treatment [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | Black anodized |
| Central load capacity [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 20 kg |
| Weight [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 3.1 kg |
| Minimum adjustment increment [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly / No subdivision] | 5 µm |
| Maximum Speed [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 20 mm/sec |
| Repeatability [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 5 µm |
| Backlash [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 4 µm |
| Missed steps [Catalogue page7 actual full model STOM-MMLS50;independent stage,not a whole combined assembly] | 3 µm |
Datasheet
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage
Motorized Stages
Oeabt
Specifications: 281.0 mm × 252.8 mm × 32.3 mm Total travel: 110mm(X axis)*75mm(Y axis) Max Load: 1kg
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
Semiconductor laser diodes are essential light sources for industrial sensing, LiDAR and laser printing. Many engineers waste time picking mismatched models. We summarize 4 simple selection standards, plus a mature industrial product: HGLD-790TO5.6-ZSP-10mW from HAUCORE.
As a professional manufacturer of precision optical thin-film components, sycco-optics (Shandong Yanggu Hengjing Optoelectronics) launches high-performance 850nm narrow band pass filters for near-infrared precision detection, intelligent sensing and optical imaging systems. Adopting advanced vacuum coating technology, the filter realizes high transmittance in the target band and deep blocking in interference bands. It effectively eliminates stray light and spectral noise, serving as a core optical component for machine vision, biochemical detection and photoelectric sensing equipment.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Loading...
Name
Phone
Organization
Use Case
Database Platform