2.5G Photodetector APD Preamp Receiver Bookham (Oclaro) AT3GC Fiber Coupled Photodetector
The detector has a fiber tail fiber input with a speed of 2.5Gbps and a built-in low noise preplay.It can be used for digital optical fiber communication.The sensitivity is up to -34dBm,and the saturation light power is -4dBm.It can work in the C and L bands. The AT3GC receiver consists of an avalanche photodiode, a low-noise preamplifier, a connectorized single-mode fiber pigtail and a hermetic package with coplanar differential output, Optimized for use in 2.5Gbps Metro applications, either as a discrete device or within a transponder, using NRZ modulation with or without FEC at data rates up to at least 2.7Gbps.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical Sensitivity sens [TC=25°C unless otherwise specified / 2²³-1 PRBS / BER<10⁻¹² / m=10 / Measured with2.5Gb/s NRZ PRBS data and no FEC.] | typical:-34.5 dBm；max:-33.0 dBm |
| High frequency -3dB corner F3dB [TC=25°C unless otherwise specified / m=10 / Load impedance is50Ω(ac coupled).] | min:1.8 GHz |
| Return Loss S22 [TC=25°C unless otherwise specified / DC-2.0GHz] | max:-8 dB |
| Optical overload Psat [TC=25°C unless otherwise specified / 2²³-1 PRBS / BER<10⁻¹² / M=3 / Measured with2.5Gb/s NRZ PRBS data and no FEC.] | min:-4 dBm |
| APD Breakdown Voltage Temperature Coefficient Tvbr [TC=25°C unless otherwise specified] | typical:0.12 V/degree C |
| APD Breakdown Voltage Vbr [TC=25°C unless otherwise specified / T=85C] | max:75 V |
| Amplifier bias voltage Vcc [TC=25°C unless otherwise specified] | min:3.0 V；typical:3.3 V；max:3.6 V |
| Amplifier Bias Current Icc [TC=25°C unless otherwise specified] | typical: 45; max: 60 |
| Amplifier bias voltage Vcc [Absolute Maximum Ratings / Vbr of individual device at given operating temperature is not to be exceeded.] | min:-0.5 V；max:3.6 V |
| Operating temperature Top [Absolute Maximum Ratings / Temperature of the module case.] | min:-40 °C；max:85 °C |
| Storage temperature Tstg [Absolute Maximum Ratings / Rating is referred to ambient temperature.] | min:-40 °C；max:85 °C |
| Maximum Transient Optical Input Power Ppo [Absolute Maximum Ratings / Optical level causing no damage; specified electrical and optical performance may not be guaranteed.] | max:10 dBm |
| APD bias voltage V_APD [Absolute Maximum Ratings / Vbr of individual device at given operating temperature is not to be exceeded. Source also cites unavailable note5.] | max:75 V |
| Fibre bend radius [Absolute Maximum Ratings] | min:35 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Stellar-PD300C,PD300C-1.5W,PD300C-3W,PD300C-UV0 Photodiode Laser Power Meter
Photodiodes
Shafan-oe
Meter Head-Power-Supply Method: USB-B interface, 5V1A phone charger Meter Head-Battery Characteristics: 3800MAH; charging time 10 hours; discharge time 24 hours Meter Head - Display: 3.5-inch true-color LCD, 480*320, multi-level backlight
LCD with Chinese/English interface; pW~W power measurement; wavelength coverage 250nm-1800nm; automatic and manual ranging; NIST traceability; convenient self-calibration; optional fiber adapters (ST, FC, LC, SC); compact design and rotating stand for easy placement
-
50um Indium Gallium Arsenide Avalanche Photodiode OAPD-X-X-P-XX-X
Photodiodes
O-send
Absolute Maximum Ratings - Storage Temperature: -55°C~+85°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings-Reverse Current [CW]: 3mA
The 50um InGaAs APD pigtail module is widely used in OTDR, CATV and optical repeater equipment.
-
75um Indium Gallium Arsenide Photodiode OPD-1-X-X-X-XX-X-X
Photodiodes
O-send
Absolute Maximum Ratings - Storage Temperature: -40°C~+100°C Absolute Maximum Ratings - Operating temperature: -40°C~+85°C Absolute Maximum Ratings - Reverse Voltage [CW]: 30V
75um InGaAs photodiodes are widely used in cable television optical reception, analog transmission, optical communications and test instruments.
-
InGaAs Photo Diode OAPD-X-X-P-XX-X
Photodiodes
O-send
21°C General Characteristics at - Wavelength Range [1550nm（ Type ）]: min:1100 nm；max:1650 nm General Characteristics at 21°C-Peak Sensitivity: 1550nm 21°C General Characteristics at - Storage Temperature: 60°C~125°C
This product is suitable for ranging optics, communication systems, optical coherence tomography and low-light detection. Sizes of 80um, 200um and 300um are available. Peak responsivity occurs at 1550nm.
-
Silicon Avalanche Photodiode OAPD-2-X-X-X-XX-X
Photodiodes
O-send
Detection Range: 400~1100nm Dark current: typical:0.2 Responsivity: min:0.40 A/W；typical:0.55 A/W
The fiber-coupled silicon avalanche photodiode couples to single-mode or multimode fiber. Various active diameters are available, including 200um and 500um. It is commonly used in telecommunications, data communications, optical communications, test instruments and OTDR.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
For 1D optical detection scenarios such as spectrum acquisition, dimensional measurement and optical scanning, area array CMOS/CCD suffer redundant pixels, high cost and slow row readout speed.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Loading...
Name
Phone
Organization
Use Case
Database Platform