Pulsed fiber amplifier
The pulsed fiber amplifier is used in nonlinear optics research and distributed fiber sensing. The module integrates a highly stable pump laser, whose wavelength can be matched to system requirements. Precise circuit control ensures stable, reliable output and amplification of pulsed optical signals.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength | min:1525 nm；typical:1550 nm；max:1565 nm |
| Output Peak Optical power | min:10 W；typical:100 W；max:500 W |
| Pulse Width | min:1 ns；typical:50 ns；max:100 ns |
| Fiber Type | SMF-28e |
| Fiber output end type | FC/APC,FC/PC,LC/PC,SC/PC or other |
| Power supply [@3A Power supply ( Module ) / Module] | DC 5V@3A Power supply ( Module ) |
| Power Dissipation | <10W |
| Power supply Interface | DB25-male Connectors |
| Communication Interface | RS232 |
| Module Dimensions | 143.5 mm × 100 mm × 22 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
SA-1A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1A-1550
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1310
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1550
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-2A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 100mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform