Dual-Axis Dynamic Inclinometer-AM2-070
The dual-axis dynamic inclinometer (hereinafter referred to as "the product") integrates a six-axis MEMS sensor with advanced circuitry. It measures inclination by detecting changes in static gravitational acceleration, converting these into angular displacement outputs relative to the horizontal plane. Utilizing MEMS accelerometers and gyroscopes with an optimized compensation algorithm model, it ensures measurement stability and repeatability.This AM2-070 dual-axis dynamic inclinometer applies to: satellite antenna star search, railway locomotive monitoring, petroleum drilling equipment, underground drilling attitude navigation, geological equipment tilt monitoring, ship navigation attitude measurement, satellite communication vehicle attitude detection, shield tunneling and pipe jacking applications.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Measurement Range | ±90° |
| Static Accuracy | ±0.1° |
| Dynamic Accuracy | ±0.5° |
| Resolution | 0.01° |
| Repeatability | ≤0.05 ° |
| Response Time | 5 ms |
| Startup Time | ≤3s |
| Measurement Axes | X-axis, Y-axis (mutually perpendicular) |
| Overall dimensions | (80±1) mm × (59±1) mm × (27±1) mm |
| Installation dimensions | (68±0.1) mm × (44±0.1) mm |
| Mounting holes | 4-Φ6.4 |
| Mounting screws | four M6 screws |
| Electrical connector | M12, male type, 5-pin, A-code |
| CAN interface | CAN2.0A (11-bit ID) |
| CAN baud rate [Default / 4.3 CAN Interface Requirements] | 250Kbps |
| Automatic output cycle [Default / 4.3 CAN Interface Requirements] | 50ms |
| CAN baud rate [Set CAN Baud Rate / selectable] | 1000Kbps |
| CAN baud rate [Set CAN Baud Rate / selectable] | 500Kbps |
| CAN baud rate [Set CAN Baud Rate / selectable] | 250Kbps |
| CAN baud rate [Set CAN Baud Rate / selectable] | 125Kbps |
| CAN baud rate [Set CAN Baud Rate / selectable] | 100Kbps |
| CAN baud rate [Default / 4.4 CAN Communication Protocol] | 125Kbps |
| Automatic output cycle [Settable / 4.4 CAN Communication Protocol] | 5ms to 1000ms |
| Automatic output cycle [Factory Default / 4.4 CAN Communication Protocol] | 100ms |
| Power-on Startup Modes | Fast Startup Mode (Default) and Zero-Offset Elimination Startup Mode (after power-on, remain stationary for 6-7 seconds). |
| Supply Voltage | 9 to 36 VDC |
| Power Consumption | ≤0.5W |
| Protections | Reverse Polarity, Short Circuit |
| MTTF [@40°C] | 260 years @40°C |
| Storage Temperature | -40°C to +70°C |
| Operating Temperature | -40°C to +70°C |
| MTTF [@40°C] | 260 years @40°C |
| EMC Compliance | DIN EN 61000 & GB/T 17626 |
| Shock Resistance [Half-sine Wave / @11ms；@11ms (Half-sine Wave)] | 100g @11ms (Half-sine Wave) |
| Vibration Resistance [RMS / 10-1000Hz] | 10g RMS, 10-1000Hz |
| IP Rating | IP67 |
| Weight | ≤250g |
| Color | Grey Sandblasted Anodized Aluminum |
Datasheet
Supplier Information
Related Products
-
Fiber Bragg Grating Pressure Sensor
Sensors
Xkkb
Fiber Bragg Grating Pressure Sensor
-
Fiber Bragg Grating Pressure Sensor
Sensors
Xkkb
Fiber Bragg Grating Pressure Sensor
-
XNY-T1 Front-Loading Single Sensor (Single Probe)
Sensors
Cdxnyzk
Compared with existing probes, the single-crystal sensor provides good thermal stability and convenient mounting. It installs from the top of the vacuum chamber, with cooling tubes perpendicular to the crystal face. Exposed crystal electrodes are properly grounded to reduce RF interference. Advantages: A front-loading crystal holder provides direct contact without intermediate parts. 4xM5 screws replace the traditional large G 1-inch nut for easy installation; chamber opening is stated as 26.5 and thickness ≤18mm. Enlarged cooling passages prevent inadequate cooling and scale blockage. An imported integrated MICRODOT T0 BNC connector, using a high-temperature Ni-C alloy vacuum process, prevents water-related short circuits. Length and vacuum interfaces can be customized. Repeatedly removable inlet/outlet locking-nut fittings are available, with default 12x8 water tubing.
-
Side Probe
Sensors
Cdxnyzk
Compared with existing probes, the single-crystal sensor provides good thermal stability and convenient mounting. It installs from the top of the vacuum chamber, with cooling tubes perpendicular to the crystal face. Exposed crystal electrodes are properly grounded to reduce RF interference. Advantages: A front-loading crystal holder provides direct contact without intermediate parts. 4xM5 screws replace the traditional large G 1-inch nut for easy installation; chamber opening is stated as 26.5 and thickness ≤18mm. Enlarged cooling passages prevent inadequate cooling and scale blockage. An imported integrated MICRODOT T0 BNC connector, using a high-temperature Ni-C alloy vacuum process, prevents water-related short circuits. Length and vacuum interfaces can be customized. Repeatedly removable inlet/outlet locking-nut fittings are available, with default 12x8 water tubing.
-
Dual Probe
Sensors
Cdxnyzk
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform