Extractive gas analysis RS2600PAT
The RS2600PAT multicomponent gas analyzer is a highly sensitive online instrument with a pressurized explosion-protected design for direct industrial installation. It simultaneously analyzes multiple gases across many applications: hydrocarbons such as CH₄, C₂H₆, C₃H₈ and C₂H₄ in petrochemicals; corrosive gases such as F₂, BF₃, PF₅, HCl and HF in fluorine chemistry; N₂, H₂, O₂, CO₂ and CO in metallurgy; and isotopic gases including H₂, D₂, T₂, HD, HT and DT. A multivariate calibration-curve model combined with chemometrics relates spectral peak intensity or area to component concentrations. Changes in sample pressure or measurement conditions do not affect quantitative accuracy, and separate models for each component are unnecessary. A supporting multipath gas pretreatment system enables sequential analysis at multiple sampling points.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Technical principle | Laser Raman spectroscopy |
| Measurement Method | Bypass real-time analysis; the sampling line carries the gas to be measured to the analyzer cabinet |
| Number of detection channels | The analyzer has a single channel and can be equipped with a multistream gas pretreatment system for online analysis of multiple gas streams |
| Detection sensitivity | ppm level |
| Equipment mounting method | Chassis installation:485 mm (width)×350 mm (height)×600 mm (depth); explosion-proof cabinet installation:800mm deep×900mm wide×1300mm high, suitable for direct installation at the production site |
| Gas sampling method | Sampling line (optional heat tracing and thermal insulation) |
| Gas inlet/outlet connection | Standard compression fitting;3mm,6mm,1/8” and1/4” optional |
| Inlet gas temperature requirements | -50~40℃; if the sample gas is above this temperature, it must be cooled before entering the analyzer for testing |
| Inlet gas pressure requirements | ＜1.0 MPa; if the sample gas is above this pressure, its pressure must be reduced before entering the analyzer for testing |
| Electrical supply requirements | 100~240 VAC，50~60 Hz |
| Operating temperature | Chassis installation: 5~35°; explosion-proof cabinet installation: -20~50° |
| Operating humidity | 0~90%RH |
| Communication Method | DB9 RS485 |
| 24h Operating | Built-in real-time automatic calibration and self-test, constant-temperature control, and positive-pressure protection. Operates normally at high and low temperatures and in explosive and corrosive environments. |
Key Features
Datasheet
Supplier Information
Related Products
-
QCLAS Inline High-Precision Gas Analysis Module
Gas Analysis
Dospectrum
-
Embedded TDLAS Measurement Unit-B
Gas Analysis
Dospectrum
Modulation Waveform: Sawtooth Wave, Sine Wave Sawtooth wave Frequency Range: 1Hz~2KHz Sawtooth wave Voltage Range: -5V~5V
-
Embedded TDLAS Measurement Unit-P
Gas Analysis
Dospectrum
Modulation Waveform: Sawtooth Wave, Sine Wave Sawtooth wave Frequency Range: 1Hz~50KHz Sawtooth wave Voltage Range: -5V~5V
-
Laser Carbon Monoxide Sensor
Gas Analysis
Gyscientech
-
Laser Photoacoustic Spectroscopy Module PAS
Gas Analysis
Gyscientech
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Loading...
Name
Phone
Organization
Use Case
Database Platform