980nm Fiber-Coupled Laser 980nm Component
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Main Laser Optical Parameters-Output Power | 30 W |
| Main Laser Optical Parameters-Center Wavelength | 980±10 nm |
| Main Laser Optical Parameters-Spectral Width | < 10 nm |
| Main Laser Optical Parameters-Wavelength Temperature Coefficient | 0.30 nm/℃ |
| Aiming-Light Optical Parameters-Output Power | 5 mW |
| Aiming-Light Optical Parameters-Center Wavelength | 650±10 nm |
| Aiming-Light Optical Parameters-Spectral Width | < 5 nm |
| Aiming-Light Optical Parameters-Wavelength Temperature Coefficient | 0.30 nm/℃ |
| Fiber parameters - Fiber core diameter | 400 µm |
| Fiber parameters - Optical fiber Numerical aperture | 0.22 |
| Fiber parameters - Fiber length | 1 m |
| Fiber parameters - Connector | FC/SMA-905 |
| Electrical Specifications - Input (DC+ DC-) | DC6 |
| Electrical Parameters-Main Laser Control (AL) | 0～5V Control 0～ Full power |
| Electrical Parameters-Aiming-Light Control (AIM) | 0～5V Control 0～ Full power |
| Electrical Parameters-Terminal (GND) | Common Ground for Main-Light and Red Aiming-Light Control Signals |
| Electrical Specifications (TEP) | Temperature Protection Output End |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Loading...
Name
Phone
Organization
Use Case
Database Platform