1×N MEMS MMOSM-PCB(N≤8)
The 1xN MEMS MM optical switch module is an advanced microelectromechanical system (MEMS) optical device that features high-speed operation, low insertion loss, and high stability. It is capable of receiving a single input light signal and accurately distributing it to N independent output ports. The module is designed compactly and operates rapidly, completing light signal switching in the millisecond range, with extremely low insertion loss, thus enhancing the overall efficiency of the system. Moreover, it supports remote control and can flexibly configure the optical path through external signals, making it suitable for applications such as data centers, optical communication networks, and scientific research experiments.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength [Specifications are without connectors. 1×N (N≤8)] | 850/1310 nm |
| Insertion Loss [Specifications are without connectors. 1×N (N≤8) IL is measured at CWL, 23℃. IL is for single-band. Dual-band adds 0.1dB. IL is 0.2dB higher for each connector added.] | ≤0.8 dB |
| Wavelength Dependent Loss [Specifications are without connectors. 1×N (N≤8) WDL is measured in a +/-20nm range at 23°C.] | ≤0.3 dB |
| Temperature Dependent Loss [Specifications are without connectors. 1×N (N≤8)] | ≤0.4 dB |
| Return Loss [Specifications are without connectors. 1×N (N≤8) RL is 5dB lower for each connector added.] | ≥30 dB |
| Cross Talk [Specifications are without connectors. 1×N (N≤8) Power off isolation is same as crosstalk.] | ≥30 dB |
| Repeatability [Specifications are without connectors. 1×N (N≤8) Repeatability is defined after 100 cycles.] | ≤0.05 dB |
| Response Time [Specifications are without connectors. 1×N (N≤8)] | ≤20 ms |
| Switching Mode [Specifications are without connectors. 1×N (N≤8)] | Non-Latching |
| Handling Power [Specifications are without connectors. 1×N (N≤8)] | ≤500 mW |
| Drive Voltage [Specifications are without connectors. 1×N (N≤8)] | DC 5±10% |
| Operating Current [Specifications are without connectors. 1×N (N≤8)] | ≤50 mA |
| Fiber Type [Specifications are without connectors. 1×N (N≤8)] | MMF |
| Operating Temperature [Specifications are without connectors. 1×N (N≤8)] | -5~+70 ℃ |
| Storage Temperature [Specifications are without connectors. 1×N (N≤8)] | -40~+85 ℃ |
| Operating Humidity [Specifications are without connectors. 1×N (N≤8)] | 5~95 % |
| Dimensions [Specifications are without connectors. 1×N (N≤8)] | 58 mm × 19.5 mm × 15.7 mm |
| Control Interface [Specifications are without connectors. 1×N (N≤8)] | TTL or I2C or RS232 |
| Follow the Standards | Telcordia GR-1221; Telcordia GR-1073 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform