1×N MEMS MMOS(N≤8)
The MEMS Multimode OS 1×N optical switch is a type of optical switch based on MEMS (Micro-Electro-Mechanical Systems) technology, allowing channel selection between a single input optical signal and N output optical signals. It features a compact size, long lifespan, and stable reliability, making it widely used in optical network fields such as OADM (Optical Add-Drop Multiplexer), OXC (Optical Cross-Connect), and OPM (Optical Power Monitor).
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength [Specifications are without connectors. 1×N (N≤8)] | 850/1310 nm |
| Insertion Loss [Specifications are without connectors. 1×N (N≤8) IL is measured at CWL, 23℃. IL is for single-band. Dual-band adds 0.1dB. IL is 0.2dB higher for each connector added.] | ≤0.8 dB |
| Wavelength Dependent Loss [Specifications are without connectors. 1×N (N≤8) WDL is measured in a +/-20nm range at 23°C.] | ≤0.3 dB |
| Temperature Dependent Loss [Specifications are without connectors. 1×N (N≤8)] | ≤0.4 dB |
| Return Loss [Specifications are without connectors. 1×N (N≤8) RL is 5dB lower for each connector added.] | ≥30 dB |
| Cross Talk [Specifications are without connectors. 1×N (N≤8) Power off isolation is same as crosstalk.] | ≥30 dB |
| Repeatability [Specifications are without connectors. 1×N (N≤8) Repeatability is defined after 100 cycles.] | ≤0.05 dB |
| Response Time [Specifications are without connectors. 1×N (N≤8)] | ≤8 ms |
| Switching Mode [Specifications are without connectors. 1×N (N≤8)] | Non-Latching |
| Handling Power [Specifications are without connectors. 1×N (N≤8)] | ≤500 mW |
| Drive Voltage [Specifications are without connectors. 1×N (N≤8)] | ≤60 V |
| Fiber Type [Specifications are without connectors. 1×N (N≤8)] | MMF |
| Operating Temperature [Specifications are without connectors. 1×N (N≤8)] | -5~+70 ℃ |
| Storage Temperature [Specifications are without connectors. 1×N (N≤8)] | -40~+85 ℃ |
| Operating Humidity [Specifications are without connectors. 1×N (N≤8)] | 5~95 % |
| Dimensions [Specifications are without connectors. 1×N (N≤8)] | Φ5.55×21.5 |
| Follow the Standards | Telcordia GR-1221; Telcordia GR-1073 |
Applications
Datasheet
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform