Monochromatic LED Series KJA-02L-0420
Outputs monochromatic collimated LED light for microscope illumination, excitation of multicolor fluorophores and similar uses. Multiple optical output power levels and wavelengths from ultraviolet to near-infrared are available. Product model: KJA-02X-XXXX. The product serves as a microscope illumination source and fluorophore excitation source. It outputs collimated light after modulation, with specially designed heat-dissipation components for stable output power. Some products also use quiet fans to minimize vibration. Different models meet different power and wavelength requirements and connect to other components through SM1 or SM2 internal threads. When used with a controller, the light source supports continuous output or millisecond pulsed output, continuously adjustable intensity, remote output control from a computer terminal and customer secondary development. Universal mechanical adapters for common commercial microscopes can be added, as can a liquid light-guide output. Light-source controller. Notes: 1. All nominal wavelength values are approximate. 2. Wavelength changes with electrical power; the peak wavelength range is ±5nm, and the radiant optical power error is ±5%. 3. The operating temperature range is 10°C to 60°C. 4. All data above are for reference only; the actual factory test report governs.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Nominal Wavelength | 420 nm |
| Wavelength Range | 420-425 nm |
| Maximum Optical Power | 700 mW |
| Bandwidth (FWHM) | 14 nm |
| Beam Divergence Angle | <10° |
| Maximum Driver Current | 1A |
| Maximum Driver Voltage | 4V |
| Dimensions | ø35x60mm³ |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
UV Oven
Light-Emitting Diodes (LEDs)
Szlamplic
The Lanpulik UVLED oven/UV curing oven uses LED emission. Different power levels and wavelengths of 365nm, 385nm, 395nm and 405nm are available for curing various UV adhesives, inks, varnishes and paints.
-
Digital-Printing Ink LP358 UV LED DIGITAL INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤0.5μm Viscosity [45℃, Rotational Viscometer]: 8-10mPa.s Inkjet Coding Speed [LED Curing at 385nm Wavelength]: 250m/min
Low odor, low migration and high adhesion. Product overview: This series contains modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives. Low viscosity and odor, rapid curing, good adhesion/flexibility, wear resistance and scratch resistance suit inkjet printing on PP, PE, PET and PVC films. It causes low skin irritation, produces no polluting emissions and has no migration after curing, meeting FDA 21 CFR 175.300 technical requirements. It is a new-generation environmentally friendly printing product.
-
Flexible-Printing Ink LF361 UV LED FLEXO INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤5μm Viscosity [Rotational Viscometer]: 1000-2000mPa.s Curing speed [385nm]: 300-500mJ/cm2
LF361 UV LED FLEXO INKS. Low odor, low migration and high adhesion. Product overview: Modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives provide low odor, rapid curing, good adhesion, abrasion resistance and scratch resistance. Suitable substrates include PP, PE, PET, PVC, aluminized film, synthetic paper and other films. Low skin irritation, no polluting emissions and no migration after curing meet FDA 21 CFR 175.300 technical requirements, making this a new-generation environmentally friendly printing product. We worked with STARBUCKS. They tried flexographic inks from many well-known companies; only Lamplic's met their special requirements for low odor, low migration and high adhesion.
-
Mini LED Laser Repair Equipment
Light-Emitting Diodes (LEDs)
Delphilaser
This equipment repairs defective pixels in Mini LED products. Unavoidable die-bonding defects can cause dark spots, detached LEDs and nonuniform bright spots. Laser rework uses removal, cleaning, rebonding, soldering and inspection to repair specific defective positions.
-
Laser Hair Removal--Super LED Hair-Removal Module
Light-Emitting Diodes (LEDs)
Oephotonics
Power: 200-720 W Center wavelength: 808 nm Chip Quantity: 4-12 pcs
Super LED hair-removal module.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
For 1D optical detection scenarios such as spectrum acquisition, dimensional measurement and optical scanning, area array CMOS/CCD suffer redundant pixels, high cost and slow row readout speed.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Loading...
Name
Phone
Organization
Use Case
Database Platform