LED-OF Series Fiber-Coupled LED Light Source LED-OF-454
The fiber-coupled LED couples a single LED to an optical fiber using butt-coupling technology. It includes an LED mounted on a heat sink and an SMA fiber connector. A multimode fiber patch cord with SMA connectors can integrate it into an optical setup.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Output Wavelength Range | 446-462nm |
| Typical Ø1mm Fiber output power [① Fiber module test conditions: the SMA patch cable has a Ø1mm plastic fiber core and length 1m. Measured using an optical-power integrating sphere.] | ≤90mW |
| Current [5W] | 390mA |
| Enclosure dimensions [Excluding base plate] | 36*47.5*24.2mm（ Excluding base plate ） |
| Voltage | 12V |
| Connector Type | SMA Interface |
| Spot shape | Speckle |
| Fiber material | Plastic |
| Fiber length | 1m |
| Enclosure material | Environmentally friendly aluminum part |
| Operating temperature | 0℃~60℃ |
| Weight | 134.9g |
| Specifications | 446-462nm， Electrical power 5W |
| Electrical power | 5W |
| Specifications [Excluding base plate] | 36*47.5*24.2mm（ Excluding base plate ） |
| Material | Environmentally friendly aluminum part |
Key Features
Datasheet
Supplier Information
Related Products
-
1075nm Single-Mode Pump Source MCSPL-1075-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1075nm]: 1075 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1075nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
1080nm Single-Mode Pump Source MCSPL-1080-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1080nm]: 1080 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1080nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
Light Guide Plate Laser Solutions
Lamps
Delphilaser
Working area [Customizable]: 1950mm×1500mm(customizable) Processing speed: 4000mm/s Dot Width: Can Reach 60um
This equipment uses a CO2 laser to produce dot patterns on PMMA and MS materials. An optimized optical design enables volume production on the new MS material and processing of material as thin as 2mm, with high yield and quick process changeover.
-
Collimator OC-XX-XX-XX
Lamps
O-send
Passband Central Wavelength: 1550 nm Polarization-dependent loss (PDL): ≤0.1 dB ReturnLos: ≥60 dB
A collimator converts diverging light, radiation or particle beams into parallel beams. Its main role is to constrain direction and range, reduce scattering interference and concentrate the signal.
-
Collimating Lens
Lamps
Sunday-optics
Enclosure material: Aluminum or Copper Optical element: Aspheric lenses, two-element lenses, three-element lenses (glass), single rubber rings, and two-piece rubber rings Dimensions: M6X0.5、M7X0.5、M9X0.5、M8X0.5、M12.7X0.5
A collimating lens converts light from each point in an aperture column into a parallel, collimated beam. Lens selection depends on aberration requirements. Simple plano-convex or biconvex lenses with larger relative apertures suit low demands; achromats with smaller relative apertures suit higher demands. Collimators are a key Sunday product, available as standard or custom designs. Sandi Optoelectronics offers single aspheres, doublets and triplets.
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
The petrochemical industry features continuous high-risk production, where production equipment operates uninterruptedly under extreme working conditions including high temperature, high pressure, strong corrosion and oxidation.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Loading...
Name
Phone
Organization
Use Case
Database Platform