(PA-CEDFA-PM-R23)- Low Noise High Power Polarization-maintaining Continuous-Wave Light Amplifier
The low-noise, high-power PM continuous-wave optical amplifier offers low noise figure, small size, easy debugging and customization. It is widely used in fiber sensing, fiber communications and measurement. Precision pump drive/control circuits monitor temperature, drive current, input/output optical power and alarm codes in real time. Host software remotely configures parameters and output power via serial port and stores parameters/alarm logs. An open protocol supports user development.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating wavelength Range λ [Customizable] | Min ：1540 nm； Typical ：1550 nm； Max ：1563 nm |
| Min Input Optical power PImin [Customizable] | Max ：-5 dBm |
| Max Input Optical power PImax [Customizable] | Min ：13.5 dBm |
| Max Output Power POmax [customizable; 0dBm] | Min ：23 dBm |
| Output Power Tuning Accuracy ΔPout [Customizable] | Max ：0.1 dBm |
| Input / Output End Isolation ISO [Customizable] | Min ：30 dB； Typical ：35 dB |
| Noise figure OSNR [customizable; PI=0dBm] | Typical ：4.5 dB； Max ：5.5 dB |
| Power stability [Customizable; Fixed-Temperature APC] | Max ：0.1 dB |
| Polarization Extinction ratio PER [Customizable] | Min ：18 dB |
| Operating mode [Customizable] | APC Mode |
| Fiber Bend Radius [Normal Operation Available] | Normal Operation at 5cm Bend Radius |
| Remote Control | Remote Communication Control through RS232 Serial Port |
| Structure Dimensions [Modular ； Customizable] | 125 mm × 90 mm × 20 mm |
| Input / Output Pigtail type [Modular ； Customizable] | PM1550 FC/APC, ≥2 m |
| Power/Communications Cable [Modular ； Customizable] | ≥2 m |
| Communication Interface Type [Modular ； Customizable] | RS-232 |
| Bare Unit Supply Voltage [Modular] | DC +12V/GND |
| Powered by power adapter [Modular; through Power Adapter] | Supports 220V mains power through a power adapter |
| Electrical power consumption [Modular] | ≤30 W |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
SA-1A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1A-1550
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1310
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1550
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-2A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 100mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform