Thermal Shock Test Machine (YTST-252)
Thermal shock test equipment is used to test the ability of material structures or composite materials to continuously withstand instantaneous changes between extremely high and extremely low temperatures, in order to discover chemical changes or physical damage caused by thermal expansion and contraction.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Basket dimensions (W×H×D) | 60 cm × 70 cm × 60 cm |
| Outer Chamber Dimensions (W×H×D) | 215 cm × 223 cm × 205 cm |
| Preheating Temperature Range | +60 ℃~+200 ℃ |
| Precooling Temperature Range | -10 ℃~-40 ℃ |
| Precooling Temperature Range | -10 ℃~-60 ℃ |
| Precooling Temperature Range | -10 ℃~-70 ℃ |
| Impact Temperature Range | -40 ℃~+150 ℃ |
| Impact Temperature Range | -55 ℃~+150 ℃ |
| Impact Temperature Range | -60 ℃~+150 ℃ |
| Temperature Fluctuation | ±2 ℃ |
| Temperature Recovery Time | <5 min |
| Basket Transfer Time | Within 15 seconds |
| Heating/cooling time - heating rate [Average; no load] | 3 ℃/min |
| Heating/cooling time - cooling rate [Average; no load] | 1 ℃/min |
| Outer Chamber Material | Cold-rolled steel plate + baked paint |
| Inner Chamber Material | SUS#304 Stainless Steel Plate |
| Insulation Material | PU + Glass Wool |
| Heating System | SUS# stainless steel high-speed heating wire |
| Refrigeration System | Compressor + Finned Evaporator + Air-Cooled (water-cooled) Condenser |
| Controller | Touch LCD Display + SSR + PID |
| Safety Device | Overheat protection circuit breaker; Compressor overload protection; Control system overload protection; Overload indicator light; Phase sequence protection; High/low pressure protection; Over-temperature protection; Fan overcurrent protection |
| Power Supply - Three-Phase AC Voltage (3Ψ) [AC] | 380 V |
| Power Supply - Frequency [AC] | 60/50 Hz |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
The petrochemical industry features continuous high-risk production, where production equipment operates uninterruptedly under extreme working conditions including high temperature, high pressure, strong corrosion and oxidation.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Loading...
Name
Phone
Organization
Use Case
Database Platform