TF-D-8018 High-power LED Spectral Color Sorting System
The TF-D-8018 high-power spectral color sorting system is a dedicated production-line device that adopts a rapid spectral analysis system for photoelectric color binning of high-power LEDs in any package, with fast testing speed. By setting parameters such as forward voltage, leakage current, luminous flux, wavelength, color temperature, x and y coordinates, it automatically bins and screens LEDs, so that tubes of the same batch are distinguished according to the consistency of their photometric and chromatic performance, thereby improving production efficiency.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Basic functions | Can test the electrical and optical characteristics of products up to 1000 mA/15 V |
| Test time | Less than 60 ms |
| Corresponding LED types | Single crystal, dual crystal, four-pin triple-chip, six-pin triple-chip |
| Test items - optical parameters | Spectral power distribution P(λ); color coordinates (x,y), (u,v); color temperature (TTC); color rendering index (Ra); dominant wavelength (λd), peak wavelength (λP); color purity, half-wave width (FWHM); luminous flux, illuminance, luminance, radiant flux |
| Test items - electrical parameters | Polarity (POL); forward current (If); reverse current (Ir); forward voltage (Vf); reverse voltage (Vr) |
| Electrical parameter range - current | 0-1000mA |
| Electrical parameter range - voltage | 0-15V |
| Wavelength Test Range | Uses an American professional spectrometer, test range: 200-800nm, 350-1050nm (optional) |
| Resolution - color coordinates (x,y) | 0.0001 |
| Resolution - luminance (Iv) [of Range] | 5 % of Range |
| Resolution - dominant wavelength (λd) [(380~780)] | 0.3 nm@(380~780) |
| Resolution - peak wavelength (λP) [(380~780)] | 0.3 nm@(380~780) |
| Resolution - forward current (If) | 0.003 mA |
| Resolution - reverse current (Ir) | 0.01 uA |
| Resolution - forward voltage (Vf) | 0.2 mV |
| Resolution - reverse voltage (Vr) | 0.2 mV |
| Repeat test accuracy - color coordinates (x,y) | 0.0005 |
| Repeat test accuracy - Luminance (Iv) [of Range] | ±2 % of Range |
| Repeat test accuracy - Dominant wavelength (λd) [(380~780)] | ±0.3 nm@(380~780) |
| Repeat test accuracy - Peak wavelength (λP) [(380~780)] | ±0.3 nm@(380~780) |
| Repeat test accuracy - Forward current (If) [ofRange] | ±0.05%ofRange |
| Repeat test accuracy - Reverse current (Ir) [ofRange] | ±0.01%ofRange |
| Repeat test accuracy - Forward voltage (Vf) [ofRange] | ±0.03%ofRange |
| Repeat test accuracy - Reverse voltage (Vr) [ofRange] | ±0.03%ofRange |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Digital-Printing Ink LP358 UV LED DIGITAL INKS LED
Light-Emitting Diodes (LEDs)
Szlamplic
Fineness [GB/T13217.3-2008]: ≤0.5μm Viscosity [45℃, Rotational Viscometer]: 8-10mPa.s Inkjet Coding Speed [LED Curing at 385nm Wavelength]: 250m/min
Low odor, low migration and high adhesion. Product overview: This series contains modified epoxy resin, modified polyester resin, photoinitiators, reactive diluent, pigments, color powder and additives. Low viscosity and odor, rapid curing, good adhesion/flexibility, wear resistance and scratch resistance suit inkjet printing on PP, PE, PET and PVC films. It causes low skin irritation, produces no polluting emissions and has no migration after curing, meeting FDA 21 CFR 175.300 technical requirements. It is a new-generation environmentally friendly printing product.
-
Mini LED Laser Repair Equipment
Light-Emitting Diodes (LEDs)
Delphilaser
This equipment repairs defective pixels in Mini LED products. Unavoidable die-bonding defects can cause dark spots, detached LEDs and nonuniform bright spots. Laser rework uses removal, cleaning, rebonding, soldering and inspection to repair specific defective positions.
-
Laser Hair Removal--Super LED Hair-Removal Module
Light-Emitting Diodes (LEDs)
Oephotonics
Power: 200-720 W Center wavelength: 808 nm Chip Quantity: 4-12 pcs
Super LED hair-removal module.
-
nanoplus 2800-6500nm LED Light Emitting Diode
Light-Emitting Diodes (LEDs)
Uniqueray
Center Wavelength [Center Wavelength (nm)=3400]: 3400 nm Spectral Width [Center Wavelength (nm)=3400]: 0.8 μm Continuous Output Power [Center Wavelength (nm)=3400]: 3 mW
nanoplus Medium Infrared LED Continuous Light Emitting Diode is A broadband. ， Incoherent and cost-effective light source ， is Laser Alternatives ， is Optimal light source for small portable mobile analysers 。 It's applied in industry. 、 Gas transfer in the context of the Internet and scientific research 。 Main features Product advantages
-
Two Dimensional Code Locator
Light-Emitting Diodes (LEDs)
Giaitech
Material: Grating Snippets
Most Current QR Code Positioning Frames Use 2 individual led Lights. ， Add Cylindrical Lens 。 Giai and the advantages of the is Adopt Laser Add Grating By the Method of ， I can add it. Positioning Accuracy ， It also increases the brightness of the positioning frame. 。 Application for the Internet of things Two Dimensional It's good work in the code. 。
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform