JW18001-METS Fiber Optic Device Environmental Test System (JW18000-METS)
Unattended long-term monitoring of IL/RL of optical components; measurement of parameters required in Telcordia standards (e.g. GR-326-CORE, GR-910-CORE, GR-1435-CORE, GR-1209-CORE and GR-2866-CORE); Verizon FOC certification for components such as patch cords, cables and passive splitters; host computer monitoring; automatically generates result analysis
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Fiber Type | 9/125 micron fiber, standard 3 mm protective sleeve |
| SC optical switch pigtail length (to DUT) | 5 m |
| Insertion Loss (IL) Dynamic Range | >65 dB |
| Insertion Loss (IL) Repeatability within 100 hours [Within 100 hours; up to 55dB] | ±0.5 dB up to 55 dB |
| Return Loss Dynamic Range | >50 dB |
| Return Loss (RL) Repeatability within 100 hours [Within 100 hours; up to 55dB] | ±0.5 dB up to 55 dB |
| Measurement Time (IL/RL) | IL/RL<2.5 s |
| Measurement Time (IL/RL) | IL/RL<3 s |
| Available Light Sources | 1310 nm /1550 nm |
| Light Source Power Stability at 23℃ [23℃；15min] | ±0.01 dB(15 min) |
| Number of Channels | 128 ports (64 channels) |
| Device Warm-up Time | >4 h |
| Input Voltage [50Hz] | 220 VAC,50 Hz |
| Computer control | Provide 1 PC, 17-inch monitor; the maximum distance between the computer and the equipment rack is 5 m |
| Mechanical configuration | Except for the computer, all equipment is installed in a movable standard 19-inch cabinet; the cabinet includes a fan installed on top and casters. Cabinet dimensions 600*800*22U |
| Fiber optic cable rack | Additionally, two standard 2U chassis are configured as fiber optic cable placement racks |
| Operating Temperature | 15 ℃-30 ℃ |
| Operating Humidity | 0-80% |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Loading...
Name
Phone
Organization
Use Case
Database Platform