USB-DT UV-Visible combined light source
USB-DT Deuterium Light Source Tungsten Halogen Lamp; Our most powerful UV-Visible combination light source; The USB-DT Deuterium Light Source Tungsten Halogen Lamp is a compact light source, only the size of a deck of cards, that provides stable broad-band output in the range of 200~2000nm. USB-DT is our most powerful UV-Visible light source developed, allowing users to control its functions via software so that it can satisfy measurement requirements in various ways.; Software control; Adjust the brightness of the tungsten filament; Activate the internal shutter to block the optical path; Independently control the on/off shutter of each light source; Utilize the low-power shutdown mode; Save settings of experimental conditions; UV-Visible combination light source used together with the USB4000 fiber optic spectrometer; The USB-DT light source can be configured in different ways and can be connected above the USB4000 line spectrometer via the USB-ADP-DT2 connector, in the form shown in the picture on the right. The USB-ADP-DT2 connector must be purchased separately. Since the USB-DT light source is connected to the USB2000 spectrometer in a stacked manner, it cannot be like a directly attached light source that requires no fiber connection, so a fiber optic and a 5V transformer (included) are also required.; Innovative Deuterium Light Source Tungsten Halogen Lamp; Spectral output diagram of the USB-DT light source; Product Specifications; Dimensions; Weight; 260 g; Power Consumption; 1.5A, 5V (DC); Spectral Range; Warm-up Time for Stable Output; 15min; Bulb Life; Deuterium lamp 800h; Tungsten 2000h; Connector; Power Output; Refer to the spectral output diagram above; Stability; 0.5% peak-to-peak (after warm-up); Ordering Information; Model; USB-DT; Deuterium Light Source Tungsten Lamp; USB-DT-B Bulb; Replacement bulb for the USB-DT light source; USB-ADP-DT2; Adapter for connecting and synchronizing the USB-DT with the USB2000; UV-Visible combination light source used together with the USB4000 fiber optic spectrometer The USB-DT light source can be configured in different ways and can be connected above the USB4000 line spectrometer via the USB-ADP-DT2 connector, in the form shown in the picture on the right. The USB-ADP-DT2 connector must be purchased separately. Since the USB-DT light source is connected to the USB2000 spectrometer in a stacked manner, it cannot be like a directly attached light source that requires no fiber connection, so a fiber optic and a 5V transformer (included) are also required.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 81 mm × 90 mm × 37 mm |
| Weight | 260 g |
| Power consumption | 1.5 A, 5 V (DC) |
| Spectral Range | 200-2000 nm |
| Warm-up time for stable output | 15 min |
| Bulb lifetime | Deuterium lamp 800 h; tungsten 2000 h |
| Connector | SMA 905 |
| Power output | Refer to the spectral output figure above |
| Stability | 0.5 % peak-to-peak (after warm-up) |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1075nm Single-Mode Pump Source MCSPL-1075-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1075nm]: 1075 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1075nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
1080nm Single-Mode Pump Source MCSPL-1080-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1080nm]: 1080 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1080nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
Light Guide Plate Laser Solutions
Lamps
Delphilaser
Working area [Customizable]: 1950mm×1500mm(customizable) Processing speed: 4000mm/s Dot Width: Can Reach 60um
This equipment uses a CO2 laser to produce dot patterns on PMMA and MS materials. An optimized optical design enables volume production on the new MS material and processing of material as thin as 2mm, with high yield and quick process changeover.
-
Collimator OC-XX-XX-XX
Lamps
O-send
Passband Central Wavelength: 1550 nm Polarization-dependent loss (PDL): ≤0.1 dB ReturnLos: ≥60 dB
A collimator converts diverging light, radiation or particle beams into parallel beams. Its main role is to constrain direction and range, reduce scattering interference and concentrate the signal.
-
Collimating Lens
Lamps
Sunday-optics
Enclosure material: Aluminum or Copper Optical element: Aspheric lenses, two-element lenses, three-element lenses (glass), single rubber rings, and two-piece rubber rings Dimensions: M6X0.5、M7X0.5、M9X0.5、M8X0.5、M12.7X0.5
A collimating lens converts light from each point in an aperture column into a parallel, collimated beam. Lens selection depends on aberration requirements. Simple plano-convex or biconvex lenses with larger relative apertures suit low demands; achromats with smaller relative apertures suit higher demands. Collimators are a key Sunday product, available as standard or custom designs. Sandi Optoelectronics offers single aspheres, doublets and triplets.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Loading...
Name
Phone
Organization
Use Case
Database Platform