LS-450 LED Light Source (R-LS-450)
The LS-450 blue pulsed light source is an LED that produces pulsed or continuous output at 470 nm -- blue region - for fluorescence measurement. This light source is designed to be used with Ocean Optics spectrometers for fluorescence measurement, with the FOXY fiber optic oxygen sensor, and sampling optics such as the CUV-UV-ALL 4-way cuvette holder. The LS-450 controls the lamp on/off by manual or software operation, for pulsed or continuous mode. It can also be used together with the LS-450 for other special LED wavelengths (see below). The LS-450 connects to the spectrometer through an interface cable, using an SMA905 connector. You can configure the operating power through the jumper module on the circuit board of the light source or the S2000 spectrometer. Also available is the LS-475 pulsed blue LED, characterized by its wavelength and fan cooling (475 nm). The R-LS-450 blue LED is the rack-mount version of the LS-450. For multiple LED users with limited desktop or rack space, the R-LS-450-2 (2 LEDs) rack-mount version is another option. You can configure the operation of the R-LS-450 and R-LS-450-2 through the module on the R-LS-450 circuit board. In addition, the LS-450 can be installed on the SF2000 spectrometer. The LS-450 is mounted on a card, in the same box as the spectrometer. Through the 10-pin connector of the spectrometer, the USB-LS-450 module connects with the USB2000 spectrometer. The spectrometer provides LED power and also ensures the same functionality and I2C communication. By adding a sampling optical element and an interface connected to a laptop computer, the SB2000-with-USB-LS-450 provides a convenient, portable system. The USB-LS-450 has a built-in 24-bit analog-to-digital converter, forming a 100 ohm platinum RTD. The USB-LS-450 can store temperature and oxygen calibration coefficients.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Power consumption [12 VDC] | 25 mA @ 12 VDC |
| Energy output (minimum) | 50 μW into 600 μm fiber |
| Stability [2-minute warm-up] | <1.0 % after 2-minute warm-up |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
1075nm Single-Mode Pump Source MCSPL-1075-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1075nm]: 1075 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1075nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
1080nm Single-Mode Pump Source MCSPL-1080-400-N-H1-1-FA-T1
Lamps
Mchlight
Center wavelength [Operating wavelength 1080nm]: 1080 nm Spectral width: ≤2 nm Output Power [Output Power Means the Maximum Output Power without Isolation or Protection Components]: 400/500 or other
Mchlight produces 1080nm high-stability single-mode pump sources using professional circuit design (ACC and APC) and a high-precision temperature control system (ATC), ensuring high-precision, highly stable laser operation; a large color LCD, a clear display of current and power, stable continuous output with adjustable power, communication interfaces and host software can be provided to customer requirements, a fiber isolator can be built in, available in modular form, for easy customer integration .
-
Light Guide Plate Laser Solutions
Lamps
Delphilaser
Working area [Customizable]: 1950mm×1500mm(customizable) Processing speed: 4000mm/s Dot Width: Can Reach 60um
This equipment uses a CO2 laser to produce dot patterns on PMMA and MS materials. An optimized optical design enables volume production on the new MS material and processing of material as thin as 2mm, with high yield and quick process changeover.
-
Collimator OC-XX-XX-XX
Lamps
O-send
Passband Central Wavelength: 1550 nm Polarization-dependent loss (PDL): ≤0.1 dB ReturnLos: ≥60 dB
A collimator converts diverging light, radiation or particle beams into parallel beams. Its main role is to constrain direction and range, reduce scattering interference and concentrate the signal.
-
Collimating Lens
Lamps
Sunday-optics
Enclosure material: Aluminum or Copper Optical element: Aspheric lenses, two-element lenses, three-element lenses (glass), single rubber rings, and two-piece rubber rings Dimensions: M6X0.5、M7X0.5、M9X0.5、M8X0.5、M12.7X0.5
A collimating lens converts light from each point in an aperture column into a parallel, collimated beam. Lens selection depends on aberration requirements. Simple plano-convex or biconvex lenses with larger relative apertures suit low demands; achromats with smaller relative apertures suit higher demands. Collimators are a key Sunday product, available as standard or custom designs. Sandi Optoelectronics offers single aspheres, doublets and triplets.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform