HR2000+ES UV-Vis Fiber Optic Spectrometer
HR2000+ES UV-Vis Fiber Optic Spectrometer - Product Features:; Includes Software and Extended Service Package ASP; Applications:; HR2000+ES UV-Vis Fiber Optic Spectrometer - Technical Specifications:
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions [Physical Parameters] | 148.6 mm × 104.8 mm × 45.1 mm |
| Weight [Physical Parameters] | 570 g |
| Detector | Sony ILX511B Linear Array Silicon CCD |
| Detector range | 200-1100 nm |
| Pixels [Detector] | 2048 Pixels |
| Pixel Size [Detector] | 14 μm × 200 μm |
| Pixel Well Depth [Detector] | ~62,500 electrons |
| Sensitivity [Detector; 400 nm; 41 photons/count @600 nm] | 75 photons/count @400 nm; 41 photons/count @600 nm |
| Design [Optical Bench] | f/4, Symmetric Crossed CT Optical Path |
| Focal Length [Optical Bench] | 101.6 mm Input and Output Focal Length |
| Entrance Aperture [Optical Bench] | 10 µm Wide Slit |
| Grating [Optical Bench] | HC-1 Provides 200-1100 nm Measurement Range |
| Detector Focusing Lens [Optical Bench] | L2 |
| OFLV Filter [Optical Bench] | OFLV 200-1100 nm |
| UV-Enhanced Window [Optical Bench] | UV2 |
| Fiber Optic Interface [Optical Bench] | SMA 905 Connector, 0.22 Numerical Aperture Fiber |
| Wavelength Range [Spectrometer] | 200-1100 nm (grating dependent) |
| Resolution [Spectrometer] | ~0.035-6.8 nm FWHM |
| Signal-to-Noise Ratio [Spectrometer] | 250:1 (at full signal) |
| A/D Resolution [Spectrometer] | 14-bit |
| Dark Noise [Spectrometer] | 12 RMS counts |
| Dynamic Range [Spectrometer] | 2 x 10^8 (system); 1300:1 single measurement |
| Integration Time [Spectrometer] | 1 ms to 65 s (20 s typical maximum) |
| Stray Light [Spectrometer; 600 nm; <0.10% @ 435 nm] | <0.05 % @ 600 nm; <0.10 % @ 435 nm |
| Calibration Linearity [Spectrometer] | >99.8 % |
| Power Consumption [Electronics; 5 VDC] | 220 mA @ 5 VDC |
| Data Transfer Rate [Electronics] | Time for full-spectrum data to reach memory, 1 ms with USB 2.0 interface, 15 ms with USB 1.1 interface |
| Input/Output Interface [Electronics] | Yes, 10 digital programmable GPIO interfaces |
| Analog Channels [Electronics] | One 13-bit analog input; one 9-bit analog output |
| Auto Zero [Electronics] | None |
| Expansion Interface Box [Electronics] | Yes, HR4-BREAKOUT |
| Trigger Modes [Electronics] | 4 modes |
| Strobe Function [Electronics] | Yes |
| Gate Delay Function [Electronics] | None |
| Connector [Electronics] | 30-pin connector |
| Operating System [Computer] | When using the USB port to connect to a desktop or laptop computer, Windows 98/ME/2000/XP, Mac OS X and Linux; when using the serial port to connect to a desktop or laptop computer, 32-BIT Windows operating system |
| Computer Interface [Computer; 480 Mbps; RS-232 (two-wire) @ 115.2 K baud] | USB 2.0 @ 480 Mbps; RS-232 (two-wire) @ 115.2 K baud |
| Peripheral Interface [Computer] | SPI (3-wire); I2C Inter-Integrated Circuit |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-15 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-16 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-17 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-18 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
-
BIM-6602A series high-resolution spectrometers UV-NIR BIM-6602A-19 Spectrometers Brolight
Fiber Connectors [BIM-6602A: Parameter Specifications]: SMA905 Detector [BIM-6602A: Parameter Specifications]: Hamamatsu S11639, Line-Array CMOS Detector Pixel [BIM-6602A: Parameter Specifications]: 2048 Pixels, Each Pixel 14μm×200μm
The BIM-6602A series spectrometer uses a high-resolution optomechanical structure in a compact, portable design, with resolution as fine as 0.08 nm. Interchangeable gratings adjust optical resolution and spectral range. Upgraded circuitry provides a 10000:1 dynamic range, minimum integration time of 0.5 milliseconds, and 600:1 signal-to-noise ratio for weak-signal detection. RS232 communication and improved interference resistance make it ideal for industrial and scientific applications.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform