20-watt rotation axial fibre-optic branding machine (electrician)
Three hundred and sixty degrees no-mortem, never faded
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Name of average output power | 20W |
| Pulse repeat frequency | 30~60kHz |
| Scan speed | F=160mm,≤7000 mm/s |
| F 160mm | min: 0.2mm @ F=160 mm |
| F 254mm | min: 0.2mm @ F=160 mm |
| Handheld | Enterprise-level worker controller with LCD monitor |
| Elevator | Named Process: 300mm |
| System power supply | 1.0 KW/AC220V/50Hz voltage range ± 5%, which, if exceeded, would require the preparation of pressurers.; 1.0 KW/AC220V/50Hz voltage range ±5%, which, if above the voltage range, requires the preparation of pressurers |
| Local | The grid line meets national standards |
| Temperature of environment | 0~40°C for air conditioners when overused |
| Environmental humidity | 30% RH 85% (relative humidity of RH: the ratio of the quality of water vapour in a wet air to the quality of water vapour in the same temperature and air pressure saturated air, expressed as a percentage).) Equipment in excess of the humidity range is exposed to the risk of exposure and air conditioning when used. 30% RH 85% (relative humidity of RH: the ratio of the quality of water vapour in a wet air to that of water vapour in the same temperature and air pressure, expressed as a percentage.) Equipment in excess of the humidity range is at risk of condensation and air conditioning is required when used |
| Oil fog | Not permitted |
| Crush | Not permitted |
| Compressed gas | Compressed air provided with 0.5-0.7 Mpa, with no visible vapour and grease. Use of formulation aerobic parts |
| Other requirements | Ground-based amplitude: less than 50m; vibration acceleration: less than 0.05g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. There is also some operational and maintenance space; ground-based amplitude: less than 50um; vibration acceleration: less than 0.05g. Large quantities of machine-bed equipment, such as pressure, are avoided in the vicinity. The equipment space requires the assurance of smoke-free and dust-free work environments that avoid heavy dust conditions such as metal polishing. No strong electromagnetic interference. And leave some room for operation and maintenance |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
JX-130 Ribbon Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: 12-Core Ribbon Fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber]: Single-Fiber Loss No Greater Than 0.3dB
-
JX-150 Single-Fiber V-Groove Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Single-mode 、 Multimode Silica fiber Fiber diameter: 125μm Core-Alignment Loss [Single Fiber; Same Single-Mode Fiber]: Single-fiber loss no greater than 0.5dB (same single-mode fiber)
-
JX-160A Single-Fiber Aligner
Optical Fibers
Jxcmc
Applicable Optical fiber: Single-core Optical fiber Fiber diameter: 125μm Core-Alignment Loss: ≤0.05dB
-
JX-160A(400μm) Fiber Aligner
Optical Fibers
Jxcmc
-
JX-160A(530μm) Fiber Aligner
Optical Fibers
Jxcmc
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Widely adopted in small home appliances, industrial instruments, smart toys and atomization devices, the 0603 patch emerald green LED serves as a core status-indicating optical component.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Loading...
Name
Phone
Organization
Use Case
Database Platform