Conductivity Tester
The TWH-10CT resistance rate tester is a digital multifunctional storage portable tester;
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Pressure test range | 0.000-25.000V |
| Voltage distribution rate | 0.001V |
| Pressure test accuracy | 10mv |
| Electroconductivity test range | 100-19999S |
| Intrusive test accuracy | ‡0.5%Rdg t6dgt% |
| Battery test capacity | 65-3000AH |
| Overpower protection | 500 V straight |
| Operating Environment | -5°C~60°C, 10%~90%RH |
| Transport type | Handheld |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
XNYGF-Ⅲ Combined Vacuum Gauge
Measurement Devices
Cdxnyzk
Measurement Range [Resistance meter]: 105-10-1Pa Measurement Range [Ionization gauge]: 101-10-6Pa Gauge Tube Model: Resistance Gauge ZJ52T, Ionization Gauge ZJ27
Measurement ranges: resistance gauge 105-10-1Pa; ionization gauge 101-10-6Pa. Gauge models: resistance gauge ZJ52T; ionization gauge ZJ27.
-
Laser Noise Test System
Measurement Devices
Dlphoton
This system is designed for high-precision measurement of laser relative intensity noise (RIN). It analyzes the noise characteristics of narrow-linewidth fiber lasers, semiconductor lasers and other light sources. Low-noise photodetection, high-resolution spectral analysis and digital signal processing accurately characterize laser intensity noise, providing reliable test data for research and industrial applications.
-
Headphone Sensor Test Equipment
Measurement Devices
Huayazhuhai
Voltage Reading: 3.6~4.2V Charge Reading: 10~100% PSensor Calibration: Read according to the gray-card distance from the earcup height
With the growth of mobile internet, technological progress and high-performance low-power processing chips, smart wearable devices have moved from concepts to commercial acquisition applications.
-
Finished-Headphone Sensor Test Equipment
Measurement Devices
Huayazhuhai
Voltage: 220V 10A Gas pressure: 0.4~0.7MP Charging Current Test: Current Acquisition, Threshold 270MA~330MA
This test equipment is designed specifically for earphones, testing current, touch functions, communication, battery voltage, shipping mode and NTC temperature.
-
Watch Crown Test Equipment
Measurement Devices
Huayazhuhai
Rotating Watch Crown Press-Force Test: 0.3g Rotating Watch Crown Damping-Force Test: 0.2~0.35g.cm Button Press-Force CCP Ratio: 0.15~0.5
With mobile Internet development, technological progress and high-performance, low-power processing chips, smart wearables have moved from concepts to commercial products, with new devices and major technology companies entering the market. Huaya's crown testing equipment responds to this rapid growth. It primarily calibrates sensors built into electronic watch crowns, measures watch damping force and tests button rebound ratios.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform