JAL-KG7-V3F V3.0
OmniVision OV5648 MIPI Focal Length 500;
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Iris | 2.2V |
| Pixels | 2056 x 1944W |
| Visual angle | 68.7° |
| Model Group Dimensions | 15.31 x 8.5 mm |
| Module Type | Focal Length |
| Match Connector | AXE524124s |
Applications
Datasheet
Supplier Information
Related Products
-
JAL-2721 V2.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus 500;
-
JAL-7675W V1.0
CMOS Image Sensors
Kailaptech
Iris: 2.5V Pixels: 640 x 480 (VGA)W
OmniVision OV7675 DVP Focal Length 30 VGA;
-
JAL-CW2-OV5640 V3.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus LED 500;
-
JAL-CW2-OV5640 V4.0
CMOS Image Sensors
Kailaptech
Iris: 2.8V Pixels: 2592 x 1944 (QSXGA)W
OmniVision OV5640 MIPI Autofocus LED 500;
-
Uncooled intensified scientific camera
CMOS Image Sensors
Atomsci
CMOS Camera - Resolution: 2048*2048 CMOS Camera - Pixel size: 6.5 um × 6.5 um CMOS Camera - Sensor Dimensions: 1.2"
Zhongke Yuanzi's ICMOS camera directly couples a CMOS image sensor to an image intensifier through a fiber-optic taper. This intensified camera series offers compact construction, small size, low power consumption and low distortion, providing low-light, high-resolution, wide-dynamic-range, large-area image output. Customization is available for different applications. Coupling an image intensifier to a CMOS sensor through relay optics provides two key benefits. First, selecting suitable intensifier input windows, photocathodes and filters extends the ICMOS spectral response from visible light to X-rays, ultraviolet or near infrared for different uses. Second, sensitivity is greatly improved to 10⁻⁴lx, addressing low-light imaging limitations of ordinary cameras. With the intensifier as its core, the camera uses pulsed high voltage to control optical-electrical-optical-electrical conversion and amplify weak light. Advanced optomechanical and electronic integration combines the intensifier, picosecond/nanosecond gating module, timing module, fiber-optic taper and CMOS sensor. Short optical gating supports synchronized weak-signal detection in low-light imaging, range gating, combustion diagnostics, time-domain Raman spectroscopy, three-dimensional imaging and fluorescence-lifetime measurements.
Related Articles
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Loading...
Name
Phone
Organization
Use Case
Database Platform