735454 Optical Transceiver Module
The 735454 Optical Transceiver Module is designed for use with AQ1300 and AQ1301 devices, providing high-speed data transmission capabilities for various optical communication applications.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength 735454-SR | 850nm |
| Maximum Output Power 735454-SR | 7.08mW |
| Beam Divergence (full angle at 1/e²) 735454-SR | 23.1° |
| Pulse Duration and Repetition Rate 735454-SR | CW |
| Center Wavelength 735454-LR | 1310nm |
| Maximum Output Power 735454-LR | 15.6mW |
| Beam Divergence (full angle at 1/e²) 735454-LR | 11.5° |
| Pulse Duration and Repetition Rate 735454-LR | CW |
| Center Wavelength 735454-ER | 1550nm |
| Maximum Output Power 735454-ER | 10.0mW |
| Beam Divergence (full angle at 1/e²) 735454-ER | 11.5° |
| Pulse Duration and Repetition Rate 735454-ER | CW |
| Center Wavelength 735454-SX | 850nm |
| Maximum Output Power 735454-SX | 2.4mW |
| Beam Divergence (full angle at 1/e²) 735454-SX | 20° |
| Pulse Duration and Repetition Rate 735454-SX | Pulse 625MHz |
| Center Wavelength 735454-LX | 1310nm |
| Maximum Output Power 735454-LX | 3.0mW |
| Beam Divergence (full angle at 1/e²) 735454-LX | 11.5° |
| Pulse Duration and Repetition Rate 735454-LX | Pulse 625MHz |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
1550 nm directly modulated optical transmitter
Transmitters and Receivers
Ytdq
: 1310 : FC∕APC : 45~860
-
optical receiver
Transmitters and Receivers
Ytdq
: -66dBc : -63dBc : 106dBuv (-3dB optical power reception)
-
optical receiver
Transmitters and Receivers
Ytdq
: -66dB : -63dB : 106dBuv (-3dB optical power reception)
-
externally modulated optical transmitter
Transmitters and Receivers
Ytdq
: 1550nm DFB LD : ≤-160dB/Hz
-
QSFP28 Host Board V1.30
Transmitters and Receivers
Steligent
Product Model: QSFP28 host board V1.30 PCB Marking: E206460 PCB Number: AL-85MA-0
QSFP28 Host Board V1.30 is a high-speed host-side evaluation/test PCB for 100G QSFP28 optical transceivers. The board routes the QSFP28 electrical interface to an arc array of gold SMA coaxial connectors around the top edge and to a QSFP28 cage/connector at the bottom center, enabling signal-integrity, compliance and interoperability testing of QSFP28 modules on the host side. PCB markings include E206460, AL-85MA-0 and the revision label "QSFP28 host board V1.30".
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
Looking for a market-verified 808nm pump laser diode? This guide introduces HAUCORE DM-8E5A-8OD (HGLD-808-COS-D-5W), its core advantages, key specs and mainstream industrial, medical & research applications.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Loading...
Name
Phone
Organization
Use Case
Database Platform