C-Band ASE Light Source RD-ASE-M3-C-1.5dB-23Bm-0.9L-1m-FC/APC
C-Band ASE:High Output/Broad Spectrum/Stability,Compact/Low Power,Rich Interfaces/Alarms,for Fiber Communications,Component Testing,Spectroscopy,etc.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Spectral Shape [Optical Parameter Specifications] | Type: Flat |
| Operating Wavelength [Optical Parameter Specifications] | min:1527 nm; max:1565 nm |
| Output Power [Optical Parameter Specifications] | max:23 dBm |
| Spectral Width [Optical Parameter Specifications; @+25℃] | Type: 38 |
| Spectral Flatness [Optical Parameter Specifications; @+25℃, @output=23dBm] | max:3.0 dB |
| Short-Term Electrical Power Stability [Optical Parameter Specifications; @+25℃] | max:0.05 dB |
| Control Mode [Optical Parameter Specifications] | APC |
| Operating Temperature [Operating Environment; Temperature Resistance ±2] | min:-10 °C; max:+60 °C |
| Storage Temperature [Operating Environment; Temperature Resistance ±2] | min:-40 °C; max:+85 °C |
| Relative Humidity [Operating Environment] | min:5 %; max:90 % |
| Power Supply [Electrical Performance] | min:+4.75; Type: +5; max:+5.25 V |
| Room-Temperature Power Consumption [Electrical Performance] | max:10 W |
| Power Consumption over the Full Temperature Range [Electrical Performance] | max:15 W |
| VCC_3.3V [26-pin interface; Pin 1; attribute P; level -] | 3.3v Power Supply |
| VCC_3.3V [26-pin interface; Pin 2; attribute P; level -] | 3.3v Power Supply |
| GND [26-pin interface; Pin 3; attribute P; level -] | GND |
| GND [26-pin interface; Pin 4; attribute P; level -] | GND |
| NC [26-pin interface; Pin 5; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 6; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 7; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 8; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 13; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 15; attribute F; level -] | Reserved |
| NC [26-pin interface; Pin 17; attribute F; level -] | Reserved |
| GND [26-pin interface; Pin 19; attribute P; level -] | GND |
| GND [26-pin interface; Pin 20; attribute P; level -] | GND |
| GND [26-pin interface; Pin 23; attribute P; level -] | GND |
| GND [26-pin interface; Pin 24; attribute P; level -] | GND |
| VCC_3.3V [26-pin interface; Pin 25; attribute P; level -] | 3.3v Power Supply |
| VCC_3.3V [26-pin interface; Pin 26; attribute P; level -] | 3.3v Power Supply |
| Dimensions: Length, Width, Height [Mechanical Structure] | 90*70*15mm±0.2mm |
| Fiber Type [Pigtail] | SMF 900um |
| Fiber Length [Pigtail; Superstructure] | 1000±2mm Superstructure |
| Fiber Connectors [Pigtail] | Input/Output: FC/APC |
| High Output Optical Power Alarm Threshold [Software Parameter Setting Ranges and Default States] | min:13; Default: 23.5; max:23.5 dBm |
| Pump Bias Current [Software Parameter Setting Ranges and Default States] | max:1.2*EOL Current |
| Output Optical Power [Software Parameter Setting Ranges and Default States] | min:13; Default: 23; max:23 dBm |
| Module High-Temperature Alarm Threshold [Software Parameter Setting Ranges and Default States] | min:50; Default: 80; max:80 ℃ |
| Pump On/Off State [Software Parameter Setting Ranges and Default States] | Minimum: NC; Default: OFF; Maximum: NC |
| Operating Mode [Software Parameter Setting Ranges and Default States] | Minimum: NC; Default: APC; Maximum: NC |
| Default Mode [Software Parameter Setting Ranges and Default States] | Default Value: 23 |
| Pump Bias Current [Software Parameter Readout Precision; Heading Minimum] | 0.1mA |
| Configured Output Optical Power [Software Parameter Readout Precision; Heading Minimum] | 0.1dBm |
| Module High-Temperature Alarm Threshold [Software Parameter Readout Precision; Heading Minimum] | 0.1℃ |
| Output Temperature (Pump) [Software Parameter Readout Precision; Heading Minimum] | 0.1℃ |
| Transmission Rate [Serial Communication Protocol] | 9600 Bit/s |
| Data Bits [Serial Communication Protocol] | 8 Bit |
| Stop Bits [Serial Communication Protocol] | 1 Bit |
| Parity Bit [Serial Communication Protocol] | Default Value |
Key Features
Datasheet
Supplier Information
Related Products
-
Portable Reflectance Test Device
Lamps
Lcdfly
Built-In Source,White Standard,Switch/Shutter for Fast Convenient Repeatable Reflectance Testing;Source Qualifier“高校”
-
FLT1027 Optical Power Detector
Lamps
Lcdfly
Applicable Wavelength Band: 400-1000nm Optical Power Relative Error: <±2% Dimensions [Customizable]: Φ30*30mm (Customizable)
This Detector Is Designed to Measure Radiant Optical Power from Light Sources.
-
Diffuse Light Source Integrating Sphere
Lamps
Lcdfly
Inside Diameter: 0.06～0.1 Meters Interface: SMA905, Φ30 Entrance Aperture Coating Reflection Wavelength Range: 250-2500nm
Diffuse-Reflectance Tests of Materials,Fruit,etc.;Custom Integrating-Sphere Specifications.
-
Integrated Optical Telephone / Stable Light Source, Optical Telephone and Fiber Telephone
Lamps
Fiberwdm
Operating Wavelength: 1310/1550 Transmitter Type: Laser Diode Optical Power (Source Label: 输工功率) [Stable Light Source]: -5~-7 dBm
Optical Talk Set Uses Existing Fiber during Construction/Testing/Repair/Maintenance,Quick High-Quality Long-Distance Full Duplex in Caves/Underground/Difficult Sites;Stable Source with Power Meter for Attenuation/Loss.
Related Articles
On January 21, 2026, SPIE Photonics West, one of the world’s leading photonics events, was held in San Francisco, USA. RaySea presented its latest self‑developed VCSEL achievements at this prestigious exhibition. Dr. Lai, the company’s senior R&D representative, delivered a technical speech during the dedicated VCSEL session. His presentation covered cutting‑edge progress of in‑house multi‑junction VCSEL solutions built for automotive lidar and embodied‑intelligence robots, drawing strong attention from the global photonics community.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Recently, our R&D crew carried‑out performance tests on domestically‑made third‑party LiDAR hardware. The original built‑in sensor chip was replaced by Optics‑Valley Quantum’s new‑generation D‑XXLA200‑02 chip.
Loading...
Name
Phone
Organization
Use Case
Database Platform