Electro-Optic Modulator Driver
This Q-switch module uses a 12V DC supply, requiring voltage fluctuation below 0.5V. Supply current is below 0.2A and power below 2W. The high-efficiency module has a drive speed below 10ns. LD-pumped laser marking machines using electro-optic modulators and driver modules provide high scanning accuracy, fast scanning, stable performance and prolonged continuous operation. Applications include electronics, bearings, watches and clocks, automotive parts, electronic products and medical devices.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Applicable Wavelength | 200 to 2200 nm |
| Output Voltage | 1.6 to 4.2 kV |
| High-Voltage Pulse Rise / Fall Edges [At a Load of 10pF] | Less than 10.0 |
| Trigger Signal - Rising Edge [BNC Interface, Optically Isolated] | Less than 1.0 |
| Trigger Signal - High Level [TTL Level] | Up to 5.0 |
| Delay between Trigger Signal and Q-Switch Output [Continuously Adjustable] | 60.0 to 250.0 uS |
| Delay Jitter | Less than 0.5 |
| Power Input [Power Consumption Less Than 3W] | 12V±0.5V |
| Operating Frequency [Single-Pulse Operation Supported] | 0-100 Hz |
| Gate-Closing Recovery Time [At a Load of 10pF, 10% to 90%] | 5 mS |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
MBC-AN-board Analog Modulator Bias-Controller OEM Board
Optical Modulator Drivers
Shconnet
Locking point [Automatic]: Quad+ or Quad- Output power stability [at quadrature operating points]: typical:±0.1 dB Modulator bias voltage V_bias [Automatic mode]: −12 to +12
Unlike classical dither signal based bias controllers, MBC-AN do not superimpose any tone signal to the optical modulated signal. They are designed for application where such a tone signal is not desired and typically for analog applications where a high purity carrier is required. They are easy to implement, and are available as benchtop instruments and OEM boards.
-
MBC-DG-board Digital/Pulse Modulator Bias-Controller OEM Board
Optical Modulator Drivers
Shconnet
The MBC-DG-board is an automatic bias controller board specially designed to lock the operating point of LiNb03 Mach-Zehnder modulators and ensure a stable operation over time and environmental conditions. The MBC-DG-board controller is a continuously tunable bias controller, meaning it allows operation of the controlled intensity modulator at any point of its transfer function and thus can be used for a large variety of applications.
-
RFDR-AN-20-HO RF Amplifier (20GHz Analog, High Power)
Optical Modulator Drivers
Shconnet
Cutoff Frequency [Matched Impedance 50Ω / Test Temperature 25℃]: min:80k Cutoff Frequency [Matched Impedance 50Ω / Test Temperature 25℃]: typical:25GHz Output Voltage (Linear) Vpp [Linear / Matched Impedance 50Ω / Test Temperature 25℃]: min:0 V; max:9 V
The Shanghai HanyuRFDR-AN-20-HO is a broadband RF amplifier module for analog applications at frequencies up to20GHz. It features a low noise figure and linear transfer function, with a1dB compression point above23dBm. Flat group-delay and gain responses reduce ripple across the bandwidth. Single-supply operation provides safe, reliable and easy use, with gain control exceeding3dB. The compact52mm x25.6mm package has K-type RF connectors compatible with SMA and an optional heat sink. This amplifier module is suited to driving lithium-niobate (LiNbO3) optical modulators in analog applications.
-
RFDR-AN-20-MO RF Amplifier (20GHz Analog, Medium Power)
Optical Modulator Drivers
Shconnet
Cutoff Frequency [Matched Impedance 50Ω / Test Temperature 25℃]: min:50k Cutoff Frequency [Matched Impedance 50Ω / Test Temperature 25℃]: typical:20GHz Output Voltage (Linear) Vpp [Linear / Matched Impedance 50Ω / Test Temperature 25℃]: min:0 V; max:7 V
The Shanghai HanyuRFDR-AN-20-MO is a broadband RF amplifier module for analog applications at frequencies up to20GHz. It features a low noise figure and linear transfer function, with a1dB compression point above21dBm. Flat group-delay and gain responses reduce ripple across the bandwidth. Single-supply operation provides safe, reliable and easy use, with gain control exceeding3dB. The compact52mm x25.6mm package has K-type RF connectors compatible with SMA and an optional heat sink. This amplifier module is suited to driving lithium-niobate (LiNbO3) optical modulators in analog applications.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform