FOTIA Pro-Series Industrial Low/Medium-Power Full-Range Nanosecond Lasers
FOTIA Pro's integrated, compact, lightweight and fully featured design saves installation space/cost and simplifies installation/removal. IP65 water/dust protection handles extreme environments and condensation from heat/humidity. Intelligent crystal-position switching extends laser life. Built-in power detection and one-click optimization maintain long-term stability. Optoelectronic integration reduces wiring-fault risk. Power options are 3/5/10W, repetition rate 10–300kHz and pulse energy above 200uJ. TTL/PWM control supports short pulses (<15ns@50k), high pulse energy, M²<1.2 and spot circularity >90%. Uses include surface engraving, on-the-fly production-line marking, internal glass engraving and 3D printing.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength | 355 nm |
| Repetition Frequency Range | 10-300 KHz |
| Beam Quality M² | <1.2 |
| Spot Circularity | >90 % |
| Divergence Angle | <1.5 mRad |
| Pointing Stability | <20 μrad/°C |
| Polarization Ratio | 100:1 Linear,Horizontal |
| Pulse Stability [RMS] | <3 % |
| Average Power Stability [over 12 hours] | <3 % |
| Cold-Start Warm-Up | <410 mins. |
| Standby Warm-Up | <10 mins. |
| Ambient Temperature | 5-40°C |
| Ambient Humidity [Non-condensing] | 20 to 80,Non-condensing |
| Storage Temperature | -20 to 50 °C |
| Storage Humidity [Non-condensing] | 20 to 80,Non-condensing |
| Power Requirements (VDC/Watts) | 24/450 |
| Communication Protocol | RS232 |
| Cooling Method | Water |
| Weight | 7 kg |
| Pulse Energy [FOTIA Pro 355; Configuration: 3W-30K] | >100 μJ |
| Specified Frequency [FOTIA Pro 355; Configuration: 3W-30K] | 30 kHz |
| Pulse Width [FOTIA Pro 355; Configuration: 3W-30K] | <15 ns |
| Beam Diameter [FOTIA Pro 355; Configuration: 3W-30K] | ~0.45 mm |
| Average Power Consumption [FOTIA Pro 355; Configuration: 3W-30K] | <110 W |
| Pulse Energy [FOTIA Pro 355; Configuration: 5W-30K] | >160 μJ |
| Specified Frequency [FOTIA Pro 355; Configuration: 5W-30K] | 30 kHz |
| Pulse Width [FOTIA Pro 355; Configuration: 5W-30K] | <15 ns |
| Beam Diameter [FOTIA Pro 355; Configuration: 5W-30K] | ~0.45 mm |
| Average Power Consumption [FOTIA Pro 355; Configuration: 5W-30K] | <130 W |
| Pulse Energy [FOTIA Pro 355; Configuration: 10W-50K] | >200 μJ |
| Specified Frequency [FOTIA Pro 355; Configuration: 10W-50K] | 50 kHz |
| Pulse Width [FOTIA Pro 355; Configuration: 10W-50K] | <13 ns |
| Beam Diameter [FOTIA Pro 355; Configuration: 10W-50K] | ~0.65 mm |
| Average Power Consumption [FOTIA Pro 355; Configuration: 10W-50K] | <180 W |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Rofin Laser Source
Laser Modules & Systems
Auroralaser
-
GW Laser Source
Laser Modules & Systems
Auroralaser
Optional Power: 1500W; 2000W; 3000W; 3300W; 4000W; 6000W; 12000w; 15000W; 20000W
-
MURATEC CO2 Upgrade
Laser Modules & Systems
Auroralaser
MURATEC CO2 Laser Upgrade to Fiber Laser Laser upgrade and renovation, carbon dioxide cutting machine renovation, cutting head renovation. Fiber laser module, power supply maintenance, PC104, high reflection alarm processing, fiber end face cleaning and fiber replacement, critical error reset; Water cooler maintenance, various cutting head cleaning, lens replacement, sensor maintenance, etc. We also provide various repair tools for you to purchase and choose from.
-
AMADA FOMII Upgrade and Renovation
Laser Modules & Systems
Auroralaser
AMADA FOMII CO2 Laser Upgrade to Fiber Laser Laser upgrade and renovation, carbon dioxide cutting machine renovation, cutting head renovation. Fiber laser module, power supply maintenance, PC104, high reflection alarm processing, fiber end face cleaning and fiber replacement, critical error reset; Water cooler maintenance, various cutting head cleaning, lens replacement, sensor maintenance, etc. We also provide various repair tools for you to purchase and choose from.
-
AMADA LCG CO2 Laser Upgrade
Laser Modules & Systems
Auroralaser
AMADA LCG CO2 Laser Upgrade to Fiber Laser Laser upgrade and renovation, carbon dioxide cutting machine renovation, cutting head renovation. Fiber laser module, power supply maintenance, PC104, high reflection alarm processing, fiber end face cleaning and fiber replacement, critical error reset; Water cooler maintenance, various cutting head cleaning, lens replacement, sensor maintenance, etc. We also provide various repair tools for you to purchase and choose from.
Related Articles
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
Loading...
Name
Phone
Organization
Use Case
Database Platform