Stepper Motor Vertical Lift Stage DOVP-20

JCOPTIX stepper vertical lifts are laser-interferometer calibrated before shipment and include factory inspection reports. Compact construction combines micrometer positioning accuracy, nanometer resolution, and high loads for microscopy, laser micromachining, fiber/waveguide alignment, interferometry, semiconductor inspection, and bioimaging with limited space. Two travels, 20 mm/10 mm, use standard 90 mm × 90 mm tops and optical mounting holes. They fit DOLP-25SX/DOLP-50SX compact stepper stages, DML90 manual stages, DMV90 manual lifts, and other 90 mm products for custom systems. Precision crossed-roller guides support vertical loads up to 10 kg with smooth motion and no lateral deviation. Ground screws and DCP-201C high-subdivision controllers provide stable 100 nm steps without low-speed stick-slip, combining resolution, rigidity, and stability. Stepper vertical lifts, 90 mm × 90 mm tops. Models: DOVP-10S, DOVP-20. Travels 10 mm or 20 mm; 90 mm × 90 mm tops with standard optical holes; micrometer accuracy and nanometer resolution. JCOPTIX offers two travels, 10 mm/20 mm. DOVP-10S travels 10 mm over heights 56-66 mm, with rated maximum speed 5 mm/s, vertical load 10 kg, bidirectional repeatability ±5 μm, and axial accuracy ≤±15μm. Pitch/yaw errors during lifting are <±100 μrad. Integrated motor, precision-ground screw, and rigid bearings eliminate conventional couplings to reduce backlash under heavy load and deliver high performance in a small volume. DOVP-20 travels 20 mm over heights 126.5-146.5 mm, with rated maximum speed 25 mm/s, vertical load 5 kg, bidirectional repeatability ±2.5 μm, axial accuracy ≤±5 μm, and pitch/yaw errors <±50 μrad. A detachable drive/control cable simplifies integration and is supplied as a DB15-to-12-pin male power/signal cable. Stepper vertical-lift kits, 90 mm × 90 mm tops. Models: DOVP-10SK, DOVP-20K. Ready to use with controller, power, and communications cable; travels 10 mm or 20 mm; 90mm × 90mm tops with standard holes; micrometer accuracy/nanometer resolution. Integrated JCOPTIX kits need no extra selections: 1 lift, 1 DCP-201C controller, 1 standard 24V/2A power supply, and 1 USB Type-C cable. Factory-matched parameters/setup provide the same performance/accuracy as standalone lifts; connect to a computer for rapid commissioning. Controller technical section, DCP-201C. JCOPTIX touchscreen stepper controller DCP-201C has a 2.8-inch color touchscreen and communications/power HUB ports. It drives JCOPTIX stepper optomechanics including linear, vertical, and rotary stages, filter wheels, shutters, and actuators, with 51200 microsteps/revolution. External signals trigger stage motion, or motion generates output triggers for other equipment. It suits on-site control and integration. A mounting plate secures it to optical tables; power supply and USB Type-C cable are included for PC software connection. New PC software supports multiple controllers with independent subwindows for centralized visual management. Built-in sequence control enables coordinated multiaxis motion without further development. Multilingual development interfaces support automated experiments and customization. New JMoition motion-control software supports DCP-201C and multiple stage types. Multiple controllers connect simultaneously, each with its own control/status subwindow. JMotion has built-in sequence editing to configure steps and execute them continuously in order, enabling complex automated motion without further development and making multidevice operation intuitive and efficient for automated experiments and customization.

Save to Favorites