Pitch/Tilt/Rotation Stage MPYR-1
JCOPTIX pitch/tilt/rotation stages provide ±5° pitch/yaw and ±10° rotation, aligning optics and fixtures to a plane and rotating within it. The rotation center lies 12 mm from the platform on a line through its center perpendicular to the surface. Pitch/yaw also pivot about this point. The top has 21 M4 holes at 12.5 mm spacing, compatible with MMA-CA1 and MMA-CA2 adjustable clamping arms. Micrometer-adjusted pitch/tilt/rotation stage. Model: MPYR-1. Pitch/yaw: ±5°. Rotation: ±10°. Platform height: 37.5 mm. Rotation center: 12 mm from platform. JCOPTIX stages provide ±5° pitch/yaw and ±10° rotation for planar alignment and in-plane rotation. The center is 12 mm from the platform along its central normal, shared by pitch/yaw. The top has 21 M4 holes at 12.5 mm spacing for MMA-CA1/MMA-CA2 arms. Before angular adjustment, position the screw pair to remove backlash without restricting micrometer motion. Make small micrometer adjustments near mark 5. Each turn produces 1.59° rotation with 0.032° resolution or 1.74° tilt with 0.035° resolution. Tighten the screw pair to lock afterward. For installation, place the stage on the table, align holes, and insert the supplied 3 M6*8 hex-socket cap screws. Start by hand, then tighten at an angle with a ball-end wrench. Adjustment tips: coordinate each micrometer with its screw pair to remove backlash without restricting motion. Before use, set all micrometers to mark 5 and adjust screw pairs for suitable spring force, assessed by pressing/rotating the top, leaving a level central position. During use, adjust slightly around mark 5. If resistance is too high or low, readjust the screw pair. Tighten it to lock the desired angle.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | Aluminum alloy |
| Surface Treatment | Black Anodized |
| Platform Dimensions | Ø70 mm |
| Platform Height | 37.5 mm |
| Pitch/Yaw Adjustment Angle | ±5° |
| Pitch/Yaw Adjustment Resolution | 0.035° |
| Rotation Adjustment Angle | ±10° |
| Rotation Adjustment Resolution | 0.032° |
| Distance Between Rotation Center and Platform Surface | 12 mm |
| Maximum load | 4 kg |
| Platform Tapped Holes | M4 |
| Base Mounting Holes | 3 M6 Countersunk Holes |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
A120-182C
Manual Stages
Chinaddwy
Operating Position: C (Centerward) Platform Dimensions: 120×120 Guide rail: V-Groove Steel Ball Guide
-
A120-182L
Manual Stages
Chinaddwy
Operating Position: L (Leftward) Platform Dimensions: 120×120 Guide rail: V-Groove Steel Ball Guide
-
A120-182R
Manual Stages
Chinaddwy
Operating Position: R (Rightward) Platform Dimensions: 120×120 Guide rail: V-Groove Steel Ball Guide
-
A120-228C
Manual Stages
Chinaddwy
Operating Position: C (Centerward) Platform Dimensions: 120×120 Guide rail: V-Groove Steel Ball Guide
-
A120-228L
Manual Stages
Chinaddwy
Operating Position: L (Leftward) Platform Dimensions: 120×120 Guide rail: V-Groove Steel Ball Guide
Related Articles
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
Developed by RealLight (Beijing), the R7M high‑power diode laser module belongs to the AW multi‑functional laser product family.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
Santec introduces the HSL‑20‑C‑E swept laser. Built on proprietary MEMS technology, this compact integrated light source combines high‑speed scanning and long coherence length, optimized for SS‑OCT imaging systems. Configurable start trigger and k‑clock outputs are available to meet development requirements for medical‑biological imaging and industrial non‑destructive inspection equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform