Prealigned Glan-Taylor Crystal Polarizing Prism Set GT10-T8K
JCOPTIX prealigned Glan-Taylor crystal polarizer sets contain two prisms, each installed in a 30 mm cage rotation mount MCRM-1T with polarization precisely aligned to the 0° mark. Two high-grade birefringent crystals are placed back-to-back with hypotenuses facing. Their shared optical-axis direction is parallel to the reflecting face and perpendicular to the beam. Different refractive indices along and perpendicular to the axis cause total internal reflection at the glass-air interface. Reflections contain all o light and some e light, while transmission is highly linearly polarized e light. Air spacing instead of chemical cement increases damage threshold, described as supporting high power. JCOPTIX Glan-Taylor prisms have black anodized housings and coatings on prism surfaces absorbing reflected light, suiting medium-power lasers. For high power, JCOPTIX offers Glan-laser prisms made from extremely low-scattering birefringent crystals.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical element material | Laser-Grade α-BBO |
| Clear Aperture Dimension | 10. 0 mm |
| Transmitted wavefront error [Header @633 nm; In-Value @632.8 nm; Retained Separately as Sourced] | < λ/8 @ 632.8 nm |
| Surface quality (scratch/dig) | 20/10 (Exit/Entrance Faces), 80/50 (Side Faces) |
| Beam Deviation | <10 arcsec |
| Structural Design | High-Damage-Threshold Air-Spaced Structure |
| Rotating Optic Mount | MCRM-1T |
| Rotation angle | 360° Continuous Rotation |
| Operating Wavelength | 700-3000 nm |
| Extinction Ratio | 100,000:1 |
| Beam-Deviating Prism | GT10-T8 × 2 |
| Acceptance angle [REF] | >4° REF |
| General Parameters - Polarizing Prism Crystal Dimensions | 12.2 mm × 13.7 mm |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
F13-620JR
Positioner
Chinaddwy
Operating Position: R (Rightward) Platform Dimensions: 60 mm × 60 mm Guide rail: Crossed-Roller Guide
Manual fine-adjustment mount; one-dimensional X-axis fine-adjustment mount.
-
F25-125JC
Positioner
Chinaddwy
Operating Position: C (Centerward) Platform Dimensions: 125 mm × 125 mm Guide rail: Crossed-Roller Guide
Manual fine-adjustment mount; one-dimensional X-axis fine-adjustment mount.
-
Silicon photonics FA coupling machine
Positioner
Terawan
Silicon-photonics FA alignment system supporting Tx FA and RX FA alignment of silicon-photonics modules.
-
SS-20-II
Positioner
Sp-scan
Incident beam spot: 20 mm Following error time: 320 μs Marking Speed [F-theta f=160mm]: 1 m/s
The SS-20-II two-dimensional scanner upgrades the SS-20 with lower power and temperature drift. The SS-20-II mainly serves QCW welding, fiber-delivered welding, hybrid welding, laser cleaning, CO2 marking/cutting, and UV cutting.
-
UV-3D dynamic (pre-focusing) galvanometer scanner PR10
Positioner
Central-laser
Working Area [Model=UV-PR10; Area configuration=250*250mm]: 250 mm × 250 mm Zoom Range [Model=UV-PR10; Area configuration=250*250mm]: 109 mm Working Focal Length [Model=UV-PR10; Area configuration=250*250mm]: 568~677 mm
UV-3D dynamic pre-focus PR10: UV pre-focus 3D dynamic-focus scanning galvanometer with XY axes and a dynamic Z axis. Supports 3D marking of height steps, reliefs, curved surfaces, and large formats. Repeat marking accuracy is 5urad; suitable for lasers ≤200W and supports XY2-100.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform