Cable Management Tools FAT-1
JCOPTIX cable-management tools bundle, secure, and route fiber patch cords and cables. Hook-and-loop wrap: applicable model CFM-CW15; fabric ties for quick binding and release, with loop and hook faces. CFM-CW15 cuts to the required length. Releasable nylon ties: applicable model CFM-CT100; reusable buckle design for tidy cable bundles. Reinforced metal organizer: applicable model CFM-CR12; rigid, impact-resistant cold-rolled steel; directly secured cover; 8 mm slots for cable removal; table or control-panel routing. Fiber patch-cord holder: applicable model FAT-1; stores 10 cords, 4 interconnection tools, and 4 dust caps; M4 mounting slot; black anodizing reduces reflection. Compact JCOPTIX holders keep cords off crowded benches. Slots 3.2 mm wide hold 10 cords, with Ø4.7 mm circular ends preventing connector slips. Four Ø12 mm holes hold interconnection tools. Two round holes of Ø4 mm and Ø5.4 mm hold dust caps. A central M4 slot connects a post.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | 6061-T6 |
| Dimensions | 80 mm × 40 mm × 3 mm |
| Surface Treatment | Black Anodized |
| Mounting hole specification | M4 Slotted Hole |
| Round Hole Diameter/Quantity | Ø12 mm / 4 Pieces |
| Number of Mountable Fiber Patch Cords | 10count |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Laser infrared card Tools and Kits Opticrystal
Radiation properties (nm/color): Green (545)@950~980; Red (670)@1500~1600; Red (650)@other wavelengths Applicable wavelength: 800~1600, especially suitable for 950/980/1064/1550 Material: PVC card coated with reflective/transmissive base material and meeting ISO standard
The laser infrared detection card is a credit card-sized card with a photosensitive area, which can convert the invisible near-infrared band beam in the range of 800-1600nm into visible light for display. This kind of card has a large photosensitive area, and the photosensitive area includes three parts, which are distributed on the front and back of the card at the same time, which is very convenient in actual use. The infrared detection card is made of up-conversion luminescent material. The same detection board can identify infrared lasers of different bands, and the luminous intensity has a proportional growth relationship with the excitation power of the infrared device.
-
Heated Manual Fiber Stripper (XQ7530)
Tools and Kits
Szoscom
Translation Stage Travel: 45mm Stripping Method: Heating Stripping Stripping Temperature: 70、
The XQ7530 heated manual fiber stripper removes coatings from different fiber types. Customized temperature and mode settings support high volume stripping. Thermocouple controlled heating elements thermally remove the coating. The machine combines stable stripping for production with flexible adjustment for research and development.
-
Large Core Fiber Cleaver (XQ7410)
Tools and Kits
Szoscom
Cleaving Type: Flat Cleave Remaining Cladding Length: 2-50mm Cleaving Angle Accuracy: Flat Cleave ： Passive Fiber ≤0.3°/ Active Fiber ≤0.5°
The XQ7410 series cleaves large core fibers and fiber combiners. Simple settings for fiber tension and blade advance before cleaving allow different fiber and combiner types to be processed. It combines stable production cleaving with flexible adjustment for research and development.
-
Large Core Fiber Cleaver (XQ7410A)
Tools and Kits
Szoscom
Cleaving Type: Flat Cleave / Angled Cleave Remaining Cladding Length: 2-50mm Cleaving Angle Accuracy: Flat Cleave ： Passive Fiber ≤0.3°/ Active Fiber ≤0.5°
The XQ7410 series cleaves large core fibers and fiber combiners. Simple settings for fiber tension and blade advance before cleaving allow different fiber and combiner types to be processed. It combines stable production cleaving with flexible adjustment for research and development.
-
Large Core Fiber Cleaver (XQ7410V)
Tools and Kits
Szoscom
Cleaving Type: Vacuum Hold Down Remaining Cladding Length: 2-50mm Cleaving Angle Accuracy: Flat Cleave ： Passive Fiber ≤0.3°/ Active Fiber ≤0.5°
The XQ7410 series cleaves large core fibers and fiber combiners. Simple settings for fiber tension and blade advance before cleaving allow different fiber and combiner types to be processed. It combines stable production cleaving with flexible adjustment for research and development.
Related Articles
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
Santec introduces the HSL‑20‑C‑E swept laser. Built on proprietary MEMS technology, this compact integrated light source combines high‑speed scanning and long coherence length, optimized for SS‑OCT imaging systems. Configurable start trigger and k‑clock outputs are available to meet development requirements for medical‑biological imaging and industrial non‑destructive inspection equipment.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
Loading...
Name
Phone
Organization
Use Case
Database Platform