Experimental/Processing System Connecting a Twelve-Glove-Port Glovebox to a Single-Station Glovebox with Heated Transfer Chamber
A double-sided glovebox with twelve glove ports integrates equipment into a single large chamber without physical internal partitions, allowing large equipment such as robot tracks and samples to move freely. Operators on both sides can access most of the interior simultaneously for transfer of complex parts and collaborative assembly. A heated antechamber is described as key to long-term sub-ppm ultrahigh purity: substrates, wafers, tools and packaging are baked at high temperature before entering the main chamber to remove moisture and organics adsorbed on surfaces and in pores. In a single-workstation glovebox, one circulation/purification system maintains uniform moisture and oxygen concentrations for preparation, coating and drying of highly sensitive samples. The system can accommodate a complex process chain that would otherwise require transfers between separate ultraclean rooms or gloveboxes. It is presented as an engineering solution for complex assembly and manufacturing without air exposure, serving advanced research with stringent reliability, purity and integration requirements. Nonstandard twelve-port purging glovebox: double-sided, two-workstation chamber, dimensions stated as 1500m X 1000mm X 1500mm. Inclined working face with removable 8 mm safety-tempered front glass, resistant to wear and corrosion with good light transmission; 3/8-inch-thick OMEGA seal. Two internal shelving levels are optional. Standard double-sided, two-workstation glovebox: dimensions 1200mm X 1000mm X 900mm; inclined working face with removable 8 mm safety-tempered front glass, resistant to wear and corrosion with good light transmission; 3/8-inch-thick OMEGA seal. Two internal shelving levels are optional. Large antechamber: cylindrical 304 stainless steel, connected to the glovebox, with an easy-to-operate shaft-lock door; 360 mm diameter and 600 mm long, piston door and polished sliding tray. Small antechamber: 150 mm diameter and 300 mm long, with manual evacuation/refill valves. Automatic purging supports atmosphere changes and rapid purging after accidental water or oxygen ingress. The connection from the automatic purging valve to the chamber piping manifold uses securely attached KF25 steel-wire-reinforced plastic tubing, with an external KF25 barbed fitting. An automatic pneumatic electroplated panel is specified. Users set the chamber gas-purging duration and touch Start on the touchscreen; purging stops automatically at the set time. Vacuum-pump start/stop timing control is added. Oxygen analyzer: imported U.S. Avcray electrochemical instrument, neither domestically manufactured nor assembled domestically; third-party data are stated to support reliability. Alternative: GE oxy.IQ™ Oxygen Transmitter. Moisture analyzer: imported British MICHELL, selected according to the customer's operating environment, neither domestically manufactured nor assembled domestically; third-party data are stated to support reliability. Alternative: GE VeriDri™ Dew-Point Transmitter. Analyzer configuration applies to the standard glovebox. The nonstandard twelve-port purging glovebox reserves moisture/oxygen-analyzer and circulation/purification interfaces for convenient later expansion. Solvent purification: a solvent column is connected in series to protect the purification column from organic solvents and remove volatilized solvents. The principal medium is high-quality, high-efficiency activated carbon. The adsorber is charged with 7 KG of washed and dried high-efficiency activated carbon and activated alumina, installed beneath the chamber, with KF40 ports at the top and bottom for user replacement. This solvent-purification configuration applies to the standard glovebox; the nonstandard twelve-port purging glovebox reserves moisture/oxygen-analyzer and circulation/purification interfaces for later expansion. Product certifications stated: ISO9001, CE and UL. Warranty: one year, with lifetime repair service. Application precautions: consult the Danger, Warning, Caution and related sections of the instruction manual.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Clean-out glove box - box - size | 1500mX1000mmX1500mm |
| Cleaning glove box - box - structure | Total stainless steel structure (Type304) |
| Cleaning glove box - box - thickness | 3 mm |
| Cleaning glove box - box - volume | 2.2 m³ |
| Cleaning glove box -- box -- front window -- glass thickness, non-stamped glove box | 8 mm |
| Cleaning glove boxes - boxes - front windows - seals - non-stamped gloves | 3/8 inches thick OMEGA seal. |
| Cleaning glove box-box-sketter-stalk-sketter | 8 in |
| Cleaning glove boxes - boxes - gloves - materials | Hard aluminium alloy gloves (combustion-resistant, aluminium anode oxide, electrolytic and organic solvent corrosion resistance) |
| Cleaning glove box - box - glove mouth - calibre | 220 mm |
| Cleaning glove boxes - boxes - gloves - materials | Original butyl rubber imports, United States |
| Cleaning glove box - box - glove - thickness | 0.4 mm |
| Nonstandard Twelve-Glove-Port Purging Glovebox—Chamber—Filter—Pore Size | 0.3 μm |
| Cleaning glove boxes -- boxes -- lighting | The box is equipped with a reaction-proof light-saving light, soft light. |
| Cleaning glove box - box - leak rate | ≤0.009 vol%/h |
| Cleaning glove boxes -- boxes -- shelf [Optional] | Two-tier shelving |
| Cleaning glove boxes - boxes - power panels - holes | 6 孔 |
| Cleaning glove boxes - box - power panels - power supply | 220V±10% 50Hz±10% |
| Cleaning glove box -- box -- interface, non-stamped glove box | Multiple standard KF-40 interfaces set |
| Cleaning glove box -- box -- support frame -- structure | Steel structure |
| Cleaning glove box -- box -- stairwell -- high-bearing foot wheel | 950 mm |
| Cleaning glove box - box - stubble - leg wheel | A thousand-way wheel. |
| Standard double-sided double-space glove box - box size | 1200mmX1000mmX900mm |
| Standard double-sided double-space glove box - box - structure | Total stainless steel structure (Type304) |
| Standard double-sided double-space glove box - box - thickness | 3 mm |
| Standard double-sided double-dot glove box - box size | 1.0 m³ |
| Standard double-sided double-space glove box - box - front window - glass thickness | 8 mm |
| Standard double-sided double-space glove box - box - front window - seal | 3/8 inches thick OMEGA seal. |
| Standard double-sided double-space glove box - box - glove mouth | 8 in |
| Standard double-sided double-space glove box - box - glove mouth - material | Hard aluminium alloy gloves (combustion-resistant, aluminium anode oxide, electrolytic and organic solvent corrosion resistance) |
| Standard double-sided double-space glove box - box - glove mouth - calibre | 220 mm |
| Standard double-dot glove box - box - glove - material | Original butyl rubber imports, United States |
| Standard double-sided double-space glove box - box - glove - thickness | 0.4 mm |
| Standard double-dot glove box - box - filter - aperture | 0.3 μm |
| Standard double-sided double-space glove box - box - lighting | The box is equipped with a reaction-proof light-saving light, soft light. |
| Standard double-dot glove box - box - leakage rate | ≤0.009 vol%/h |
| Standard double-sided double-space glove box - box - shelf [Optional] | Two-tier shelving |
| Standard double-dot glove box - box - power panels - holes | 6 孔 |
| Standard double-dot glove box - box - power panels - power supply | 220V±10% 50Hz±10% |
| Standard double-sided double-space glove box - box - interface | Multiple standard KF-40 interfaces set |
| Standard double-sided double-space glove box - box - support frame - structure | Steel structure |
| Standard double-sided double-space glove box - box - support frame - high footer | 950 mm |
| Standard double-sided double-space glove box - box - support frame - foot wheel | A thousand-way wheel. |
| Transition class -- large transition class -- structure | Cylinder |
| Transition class -- large transition class -- materials | 304 stainless steel |
| Transition class -- large transition class -- door | Axle locks, big bridge door. |
| Transition class -- large transition class -- door | Piston Gate |
| Transition class -- large transition class -- diameter | 360 mm |
| Transition class -- large transition class -- long | 600 mm |
| Transition class -- large transition module -- pallet | Slideable Tray |
| Transition class -- large transition module -- vacuum [Large, small right overboard requires a vacuum belt to be displayed] | <1 bar |
| Transition class -- small transition module -- materials | stainless steel type 304 (1.4301) |
| Transition class - small transition module - thickness | 2 mm |
| Transition class -- small transition class -- diameter | 150 mm |
| Transition class -- small transit class -- long | 300 mm |
| Transition class -- small transition module -- vacuum [Large, small right-hand transit module requires a vacuum belt to be displayed] | ≤1 bar |
| Purge system - valve to box pipe integration | Strongly connected KF25 steel wire plastic tube |
| Cleaning system -- external interface | KF25 tower. |
| Analyzers - oxygen analysers - dimensions [Standard glove box set] | 205 mm（L） x 80 mm（W） x 60 mm（H） |
| Analyzers - oxygen analysers - range measurement [Standard glove box set] | 0-1000 Ppm |
| Analyzer-water analyser-size [Standard glove box set] | 205 mm（L） x 80 mm（W） x 60 mm（H） |
| Analyzers - hydrometric analysers - range of measurements [Standard glove box set] | 0-1000 ppm |
| Solvent purification system - media [Standard glove box set] | High-quality, high-efficiency, active charcoal |
| Solvent purification systems - fillings [Standard glove box set] | High-impact activated carbon and aluminum oxide dryed with water |
| Solvent purification systems - filled quantity [Standard glove box set] | 7 KG |
| Solvent purification system -- location of installation [Standard glove box set] | Bottom of the box. |
| Solvent purification system - interface [Standard glove box set; above and below the column] | KF40 interface |
| Cleaning glove box for non-stamped gloves -- preset interface | Hydrogen analyser interface, cycle purification system interface, etc. |
Key Features
Datasheet
Supplier Information
Related Products
-
Coated Component
Material-based Production Equipment
Fuzhouzhiyi
-
Electro-Hydraulic Synchronous CNC Press Brake Machine 80T2500
Material-based Production Equipment
Auroralaser
Bending Capacity: 800 kN Bending Length: 2500 mm Distance Between Columns: 2000 mm
The Electro-Hydraulic Synchronous CNC Press Brake employs a high-precision electro-hydraulic control system and robust frame to ensure efficient, stable processing of complex bends, significantly enhancing production accuracy and profitability.
-
Electro-Hydraulic Synchronous CNC Press Brake Machine 110T2500
Material-based Production Equipment
Auroralaser
Bending Capacity: 1100 kN Bending Length: 2500 mm Distance Between Columns: 2000 mm
The Electro-Hydraulic Synchronous CNC Press Brake employs a high-precision electro-hydraulic control system and robust frame to ensure efficient, stable processing of complex bends, significantly enhancing production accuracy and profitability.
-
Electro-Hydraulic Synchronous CNC Press Brake Machine 110T4100
Material-based Production Equipment
Auroralaser
Bending Capacity: 1100 kN Bending Length: 4100 mm Distance Between Columns: 3500 mm
The Electro-Hydraulic Synchronous CNC Press Brake employs a high-precision electro-hydraulic control system and robust frame to ensure efficient, stable processing of complex bends, significantly enhancing production accuracy and profitability.
-
Wafer Bonding
Material-based Production Equipment
Jmwafer
晶沐光电 combines wafer grinding/polishing/thinning and laser processing to provide homogeneous/heterogeneous, permanent/temporary wafer bonding. High vacuum sealing, heat/pressure and surface activation create reliable interfaces for3D integration, advanced packaging, MEMS, power, RF and optoelectronic devices, including custom small batches for institutes. Referenced processes/equipment include single-wafer cleaning, class100 cleanroom bonding and KSB-H1000. Permanent bonding irreversibly joins wafers/chips into strong, hermetic, reliable structures. Direct bonding uses ultracleaning, plasma activation and CMP, room-temperature van der Waals prebonding and annealed Si-O-Si covalent bonds: no interlayer, high strength/hermeticity/insulation, void-free/low-stress interfaces for Si/Si, Si/SiO2 and Si/SOI. Anodic bonding uses heat/high electric field for silicon–glass chemical bonds, near-bulk strength, low leak rate and stable sealed cavities, such as Si/borosilicate. Eutectic bonding melts/diffuses Au-Sn, Cu-Sn, In or Au-Si interlayers, yielding low-temperature, conductive, thermally conductive, reliable bonds with broad process windows for Cu/Au/Sn-coated wafers. Thermocompression uses heat/precise pressure for solder-free metal-atom diffusion, high interconnect density/low interface resistance, and direct bonding of Si, metal-coated, compound-semiconductor, sapphire, glass, SiC or ceramic wafers. Hybrid bonding simultaneously joins copper/dielectric for integrated mechanical/electrical submicron-pitch connections, high bandwidth, low latency/loss and HBM/AI stacking in3D NAND, HBM, AI processors, high-end Chiplets and VLSI wafers. Examples are sapphire/Si, SiO2/sapphire and GaAs/Si. Temporary bonding glues a wafer/chip to a carrier for backside processing then gentle release. Thermal-slide bonding softens thermoplastics, PPC or polyimides with heat, hardens on cooling and reheats/slides for release; it resists heat/chemicals for Si thinning, TSV and advanced packaging, but needs heating and may leave adhesive. UV release cures for strength then shortwave UV degrades/debonds UV-release adhesive/double-sided tape: gentle room-temperature release for heat-sensitive MEMS, CIS, compound and ultrathin wafers, but needs a transparent carrier and has moderate heat resistance. Laser release uses transparent carriers and an absorbing layer to decompose/release adhesive without contact; laser-responsive coating plus bonding adhesive gives stress-free, residue-free, precise release for large ultrathin3D IC/HBM/Chiplet/advanced-packaging wafers, at high equipment/material cost. Low-melting In, SnBi or AuSn alloys bond molten and remelt for release; high heat tolerance/conductivity and acid/alkali resistance suit SiC/GaN power devices/high-temperature processes, but metal residue is difficult to clean and processing is complex. Bondable materials include Si, SiC, GaN, sapphire, GaAs, InP, quartz/borosilicate glass, alumina/aluminum-nitride ceramics, diamond, bonded composites, SOI, lithium tantalate/niobate and coated wafers.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform