Vlite-Hi-532 Series Laser Vlite-Hi-532-80
The Vlite-Hi-532 series uses CW LD pumping of an Nd:YAG gain medium, acousto-optic Q-switching and efficient intracavity frequency doubling for high-frequency pulsed green output. Single-pulse energy reaches 12mJ@10kHz with 120W average power and adjustable repetition rate from 5kHz-30kHz. Compared with Vlite-Hi-527, Vlite-Hi-532 has a higher repetition rate and is mainly used for high-frequency particle image velocimetry (PIV) and pumping high-frequency Ti:sapphire amplifiers. Industrial design provides consistent external form and electrical interfaces for system integration.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelengths | 532nm±0.5nm |
| Average Power [10kHz] | 80W |
| Pulse Energy [10kHz] | 8mJ |
| Pulse Width [10kHz; Full Width at Half Maximum (FWHM)] | <150ns |
| Frequency Adjustment Range | 1kHz-30kHz |
| Power Stability [RMS;8hours; Standard Deviation / Average] | <1% |
| Mode | Multimode |
| Spot Diameter [Measured within 10cm of the laser output port] | 4mm |
| Spot Ellipticity | >85% |
| Divergence [Full angle at 86.5% of laser energy] | <10mrad |
| Pointing stability (RMS) | <20μrad |
| Power Supply Consumption | 1.5kW*2 units |
| Chiller Power Consumption | 3kW |
| Cooling Power | 4kW |
| Ambient Temperature | 15-30℃ |
| Warm-Up Time | <5min |
| Cable Length | 3m |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
DTS pulsed laser
Laser Modules & Systems
Oe-photonics
Operating Wavelength: typical:1550 nm Peak output optical power: typical:30 W Pulse Width: min:5 ns; typical:10 ns
The DTS pulsed laser integrates a nanosecond seed laser and fiber power amplifier for distributed fiber temperature sensing, laser ranging, and fiber sensing. Optimized nanosecond drive circuitry and a low-noise erbium-doped amplifier produce stable pulses with high peak power and low distortion. External triggering and serial configuration of width, peak power, and other parameters provide high integration, compact size, and easy setup. Rigorous environmental testing supports long-term reliability and stability.
-
Ultra-narrow-linewidth fiber laser (single-mode/polarization-maintaining)
Laser Modules & Systems
Oe-photonics
Operating Wavelength Range: typical:1550.12 nm Output Optical Power: typical:10 dBm Equivalent spectral linewidth: typical:3 kHz
The UNL fiber-laser series for sensing offers narrow linewidth, long coherence length, low noise, and strong environmental-interference resistance. Distinctive optics and precise drive/control eliminate external temperature and vibration effects on wavelength for stable single-longitudinal-mode, ultra-narrow-linewidth, single-frequency output. Serial configuration, high integration, compact size, and easy setup are provided, with custom single-mode or PM-fiber outputs.
-
Industrial laser welding wire feeder
Laser Modules & Systems
Qilinlaser
-
Industrial laser wire-feed assembly-SST30
Laser Modules & Systems
Qilinlaser
-
Energy Storage Industrial Welding Head
Laser Modules & Systems
Qilinlaser
Interface Type (Interface): QBH/RD Clear Aperture (Optical Aperture): 20 mm Power Handling (Power): 4000 W
QBH/RD compatibility with different fiber lasers; drawer optics for easy replacement, rated for 4000W; modular quick assembly with optimized optics, water cooling, and double sealing for durability and stability; ring, filled, and rectangular wobble patterns for multifunction welding; efficient, time-saving energy-storage welding with a youthful design, lower labor costs, strong interference resistance, safety, and stability; industrial uses including new-energy, battery, and condenser-tube welding.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform