160mJ Laser target designator 160 LR160
Model: LR160. The LR160 high-energy designator ranges over 0.2m~30km with low error and high accuracy. Transmitter, receiver/ranging unit, driver and control/communications unit weigh 3.2 kilograms together. Functions include ranging, designation, optically isolated triggering and external triggering. LR160 allows switching between 85mJ and 160mJ for different applications.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength | 1064 nm ±1 nm |
| Laser irradiation energy | Switchable between 85mJ and 160mJ |
| Optical delay | 304µs±1µs |
| Laser beam scattering angle | ≤0.2mrad |
| Irradiation frequency | 8～21 Hz |
| Ranging frequency | 10 Hz |
| Laser pulse width | 10ns ~15ns |
| Power supply Stability | ≤±8% |
| Ranging range [Target dimensions10m×10m×8m; visibility30km] | 0.2m～30km (target dimensions 10m×10m×8m, visibility 30km) |
| Ranging error | ≤5 m |
| Target selection | First/second/last |
| Measurement accuracy rate | 98% |
| Start-up time [At room temperature] | ＜1 minute (at room temperature) |
| Operating time [Ranging mode / Low temperature/room temperature] | Operate continuously for 5 minutes, rest for 4 minutes, for 5 consecutive cycles |
| Operating time [Ranging mode / High temperature,85mj output] | Operate continuously for 5 minutes, rest for 4 minutes, for 2 consecutive cycles |
| Operating time [Ranging mode / High temperature,160mj output] | Operate continuously for 2 minutes, rest for 4 minutes, for 2 consecutive cycles |
| Operating time [Illumination mode / Low temperature/room temperature,85mj output] | Irradiate for 90s, rest for 60s, for 5 consecutive cycles |
| Operating time [Illumination mode / Low temperature/room temperature,160mj output] | Irradiate for 60s, rest for 60s, for 5 consecutive cycles |
| Operating time [Illumination mode / High temperature,85mj output] | Irradiate for 90s, rest for 60s, for 1 consecutive cycle |
| Operating time [Illumination mode / High temperature,160mj output] | Irradiate for 60s, rest for 60s, for 1 consecutive cycle |
| Complete set weight | ≤3.2kg |
| Power supply range | 20V～33V， DC |
| Power Dissipation [Extreme temperature] | Peak power no greater than 400W; standby power no greater than 60W (extreme temperatures) |
| Reliability MTBF | MTBF no less than 4000h |
| Safety | A warning device is provided for laser operation |
| Safety | A conspicuous warning sign is provided at the laser-emitter outlet |
| Safety | Equipment properly grounded |
| Maintainability | All major functional components and equipment have fault and normal-operation indicators |
| Maintainability | Mean time to repair MTTR no greater than 20min |
| Electromagnetic compatibility requirements | During system startup and operation, this equipment is compatible with the other equipment in the system and operates normally |
| Operating Temperature | -40℃～+55℃ |
| Storage Temperature | -40℃～+70℃ |
| Damp heat - relative humidity | 95%±3% |
| Damp heat - temperature | +25℃±2℃ |
| Damp heat - storage time | 72h |
| grms=6.06 [20Hz to 80Hz] | +3dB/oct |
| grms=6.06 [80Hz to 350Hz] | G2/0.04Hz |
| grms=6.06 [350Hz to 2000Hz] | -3dB/oct |
| Vibration - vibration direction and time | Vibrate in one direction for at least 10 minutes |
| Temperature cycling - temperature range [Startup test] | -35±3℃～+52±2℃ |
| Temperature cycling - temperature change rate [Temperature rise] | 10℃/min |
| Temperature cycling - temperature change rate [Cooling] | 10℃/min |
| Temperature cycling - cycle time | 10 times; the last 2 cycles must be fault-free. If a fault occurs in the last 2 cycles, complete 2 additional fault-free cycles after repair. |
| Temperature cycling - period | Each cycle lasts 4h and includes heating → holding → cooling → holding → heating |
| Temperature cycling - high/low temperature dwell time | Dwell time depends on the heat capacity of the specimen. After the specimen has heated or cooled throughout and its internal temperature has stabilized, hold for 5min. |
| Water spray requirements | Water applied over the entire device |
| Vehicle vibration - Frequency | 5Hz～200Hz |
| Vehicle vibration - Amplitude [5Hz～7Hz] | Amplitude 12mm～8mm |
| Vehicle vibration - Test conditions | 7Hz～200Hz, constant acceleration 1.5g |
| Vehicle vibration - Direction | Along the vertical axis and side; directions: perpendicular and transverse to the axis |
| Vehicle vibration - Cycle | Logarithmic sweep from 5Hz to 200Hz, each cycle at 5Hz for 12min. If the specimen's resonant frequency is below 5Hz, the test frequency may extend down to 2Hz: sweep logarithmically over 2Hz to 200Hz, with each 2Hz sweep cycle lasting 15min. Vibration duration in each direction is 90min. |
| Product dimensions | ≤306×145×94 MM |
| Power supply Interface | +24VDC ±10%; |
| External trigger level | RS422 differential levels; |
| Cooling Mode | The cooling fan on top of the housing is switched on; |
Datasheet
Supplier Information
Related Products
-
Two-dimensional scanning galvanometer
Laser Scanning and Ranging
Startin-optronics
-
Two-dimensional scanning galvanometer kit
Laser Scanning and Ranging
Startin-optronics
-
Two-dimensional scanning galvanometer module
Laser Scanning and Ranging
Startin-optronics
-
100mJ Single-lens laser target designator 100K30 LR100K30
Laser Scanning and Ranging
Erdikeji
Laser Type: NdYAG Laser Wavelength: 1.064 μm± 1μm Pulse Energy: ≥100mJ
Model: LR100K30. The LR100K30 single-lens laser target designator uses a distinctive source design for compact construction, long ranging distance and high output. Dimensions of 270X110X90 accommodate laser energy up to 100 millijoules, pulse width above 10 nanoseconds and initial divergence 50% smaller than conventional products. A common transmit/receive aperture keeps the design compact for electro-optical pods, vehicle-mounted target-designator ranging and other applications.
-
Laser ranging module high-accuracy distance sensor LR1500E2
Laser Scanning and Ranging
Erdikeji
Laser Wavelength: 905 nm ±5 nm Laser beam divergence: < 6 mrad (small laser spot) Optical material: Resin aspheric lens
Model: LR15000E2. The LR1500E2 laser ranging module is a high-performance, lightweight sensor for long-distance measurement. High accuracy, a small aiming spot, ultralow power consumption, durability and flexibility meet industrial, outdoor and commercial requirements. Reliable performance and easy integration suit projects requiring stable, high-quality ranging.
Related Articles
Semiconductor laser diodes are essential light sources for industrial sensing, LiDAR and laser printing. Many engineers waste time picking mismatched models. We summarize 4 simple selection standards, plus a mature industrial product: HGLD-790TO5.6-ZSP-10mW from HAUCORE.
As a professional manufacturer of precision optical thin-film components, sycco-optics (Shandong Yanggu Hengjing Optoelectronics) launches high-performance 850nm narrow band pass filters for near-infrared precision detection, intelligent sensing and optical imaging systems. Adopting advanced vacuum coating technology, the filter realizes high transmittance in the target band and deep blocking in interference bands. It effectively eliminates stray light and spectral noise, serving as a core optical component for machine vision, biochemical detection and photoelectric sensing equipment.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Loading...
Name
Phone
Organization
Use Case
Database Platform