RTP Electro Opitcal Devices Product Attributes
We are experts in the field of RTP Electro Opitcal Devices. Coupletech provides RTP EO Q-Switches. RTP Electro-Opitcal Devices is an isomorph crystal as KTP crystal, which is used in nonlinear and Electro-Optical applications. It has higher damage threshold (about 1.8 times of KTP), high resistivity and could be used in high repetition rate, no hygroscopic and no piezo-electric effect. It features good optical transparency from around 400nm to over 4µm and very importantly for intra-cavity laser operation, RTP EO Devices offer a high resistance to optical damage with power handling almost 1GW/cm2 for 1ns pulses at 1064nm. The whole transmission range is from 350nm to 4500nm. RTP (Rubidium Titanyl Phosphate– RbTiOPO4) is a good electro‐optic crystal suitable for a wide variety of applications (such as Q‐Switches, Amplitude & Phase Modulators, Pulse Pickers and so on.) and operation in industrial, medical, and defense products. The crystal is transparent at most common visible and near infrared laser wavelengths. It works well over a very wide temperature range and at very high repetition rates. RTP based Q‐switch devices are offered in matched pair configurations, in a temperature compensating design. When used for applications such as Q‐Switches and Amplitude Modulators, the crystals are mounted in many ways, just mounted or cylindrical housing, additional, in simple mounted way, the input beam is polarized along the diagonal of the face in based RTP crystals. Advantages of RTP: High repetition rate Non-hygroscopic Large nonlinear optical and electro-optical coefficients Low half-wave voltage No Piezoelectric Ringing high damage threshold; Parameters of RTP: Transmission at 1064nm: >98.5% Apertures Available: 2, 3, 4, 5, 6, 7, 8, 9, 10mm Half wave voltages at 1064nm: 1000V (3x3x10+10) Pockels Cell size: 20mm diameter for 3x3 aperture, 4x4 aperture, 25.4mm diameter for5x5 aperture Contrast ratio: >23dB Acceptance Angle: > 1° Damage Threshold: >600MW/cm2 at 1064nm 10ns Stability over a wide temperature range (-50℃ – +70℃) Coupletech could provides new design, high reliability RTP EO Devices. Coupletech could also provides many types of EO Q Switches, such as BBO Pockels Cells, Sealed BBO Pockels Cells, DKDP (KD*P) Pockels Cell, and LiNbO3 and MgO:LN Pockels Cell.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Model No. | CPRPC-08 |
| Brand | COUPLETECH |
| Cutting Angle | X-cut，Y-cutm |
| Half Wave Voltages | 3000V For 8x8x(10+10) At 1064n |
| Apertures Available | 2, 3, 4, 5, 6, 7, 8, 9, 10mm |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Large-Aperture Pockels Cell GPC-001
EOM
Gigaphotonics
Maximum Repetition Rate: 1 kHz Wavelength and Damage Threshold [10ns; 10 Hz]: 1030 nm，10 J/cm², 10ns, 10 Hz Crystal Quantity: Single BBO or Dual BBO Crystal
A Pockels cell uses phase retardation in an electro-optic crystal: applied voltage provides electro-optic modulation or switching. It is a core component of Q-switched lasers and regenerative amplifiers. GPC Pockels cells offer a large clear aperture, high-voltage/high-repetition-rate modulation, compact size and easy optical adjustment. Host-computer software lets researchers adjust parameters and display status in real time.
-
Large-Aperture Pockels Cell GPC-010
EOM
Gigaphotonics
Maximum Repetition Rate: 10 kHz Wavelength and Damage Threshold [10ns; 10 Hz]: 1030 nm，10 J/cm², 10ns, 10 Hz Crystal Quantity: Single BBO or Dual BBO Crystal
A Pockels cell uses phase retardation in an electro-optic crystal: applied voltage provides electro-optic modulation or switching. It is a core component of Q-switched lasers and regenerative amplifiers. GPC Pockels cells offer a large clear aperture, high-voltage/high-repetition-rate modulation, compact size and easy optical adjustment. Host-computer software lets researchers adjust parameters and display status in real time.
-
Large-Aperture Pockels Cell GPC-100
EOM
Gigaphotonics
Maximum Repetition Rate: 100 kHz Wavelength and Damage Threshold [10ns; 10 Hz]: 1030 nm，10 J/cm², 10ns, 10 Hz Crystal Quantity: Single BBO or Dual BBO Crystal
A Pockels cell uses phase retardation in an electro-optic crystal: applied voltage provides electro-optic modulation or switching. It is a core component of Q-switched lasers and regenerative amplifiers. GPC Pockels cells offer a large clear aperture, high-voltage/high-repetition-rate modulation, compact size and easy optical adjustment. Host-computer software lets researchers adjust parameters and display status in real time.
-
Large-Aperture Pockels Cell GPC-500
EOM
Gigaphotonics
Maximum Repetition Rate: 500 kHz Wavelength and Damage Threshold [10ns; 10 Hz]: 1030 nm，10 J/cm², 10ns, 10 Hz Crystal Quantity: Single BBO or Dual BBO Crystal
A Pockels cell uses phase retardation in an electro-optic crystal: applied voltage provides electro-optic modulation or switching. It is a core component of Q-switched lasers and regenerative amplifiers. GPC Pockels cells offer a large clear aperture, high-voltage/high-repetition-rate modulation, compact size and easy optical adjustment. Host-computer software lets researchers adjust parameters and display status in real time.
-
Pockels Cell-1030 High-Speed Laser Pulse Optical Switching Module
EOM
Unityphotonics
Operating voltage: 3kV Max Repetition Rate: 1MHz Leading and trailing edges: ＜10ns
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
The accelerated construction of new‑generation power systems has brought revolutionary upgrades to power‑equipment maintenance workflows.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Loading...
Name
Phone
Organization
Use Case
Database Platform