High/Low-Temperature Low-Pressure Test Chamber XB-OTS-1000M
For heat-dissipating test samples, the heat dissipation must not exceed the test chamber's cooling capacity. The cooling capacity is dynamic and varies with the temperature point.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Inner chamber Dimensions (WxDxH) | 100x100x100CM |
| Outer box dimensions (WxDxH) | 140x325x200CM |
| Temperature Range | -70～+150°C |
| Temperature Fluctuation [At Atmospheric Pressure and No Load] | ±0.5°C(At Atmospheric Pressure and No Load) |
| Temperature Deviation [At Atmospheric Pressure and No Load] | ±2.0°C(At Atmospheric Pressure and No Load) |
| Temperature Uniformity [At Atmospheric Pressure and No Load] | ≤2°C(At Atmospheric Pressure and No Load) |
| Gas pressure Range | Atmospheric Pressure～1KPa or ～0.5KPa |
| Operating environment Temperature | +5～+35°C |
| Enclosure | Cold-Rolled Steel Sheet with Rustproofing and Powder-Coated Surface |
| Inner Body | Stainless Steel Plate SUS304 |
| Cooling Compressor | Imported Compressor |
| Cooling method | Water cooling |
| Monitor | 7-inch TFT color LCD display |
| Operating Mode | Program Setting, Fixed-Value Mode |
| Setting Method | Chinese Menu, Touchscreen Input |
| Temperature Sensor | Armored Platinum Resistance Sensor |
| Pressure Sensor | Silicon Resistive Pressure Transmitter |
| Curve Recording Function | Stores Device Setpoints, Sampled Values and Sampling Times |
| Additional Functions | Fault Alarm with Cause and Corrective-Action Prompts; Fault History; Overtemperature Protection; Upper/Lower Temperature Limit Protection; Power-Failure Protection; Test Pause; Alarm Output; Timing Function (Automatic Start and Stop) |
| Power supply | AC (380±38)V (50±0.5)Hz, Three-Phase Four-Wire + Protective Earth |
| Power | 32.5KW |
| Meets Standard | GJB150.2、GJB150.3、GJB150.4、GJB150.6、GB/T2423.1、GB/T2423.2、GB/T2423.21 |
| Heating time (20～+150°C) | ≤60 minutes |
| Cooling Time (20～-60°C) | ≤80 minutes |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
Driven by the rapid upgrading of industrial automation, high-precision displacement sensing technology has become a core foundation of intelligent manufacturing.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
Loading...
Name
Phone
Organization
Use Case
Database Platform