Quantum Efficiency Measurement System SolarYield
Quantum Efficiency Measurement System SolarYield, Current Density, CIGS, GeTe, OPV, Photovoltaic Device
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Light Source | 200nm~2500nm; Power: 60W-450W |
| CW Light Source | 450nm~2400nm; Power: 60W-450W |
| Light Source | 100-1000Hz CW, Light Source: Light Source; Reflectance Optical Mirror: Wavelength Optical Mirror Reflectance 75%; Dimensions: 1mm x 1mm, Angle of Incidence: 8, 530nm 2mW/cm^2 |
| HiSMU | Voltage: 15V; Current: 40mA; Voltage Current: 10mV/10uA; Voltage Current: 1mV/1uA |
| HiSMU | Voltage: 200mV, 2V, 20V, 200V; Current: 1uA~1A; Voltage Current: 5uV/50pA; Voltage Current: 100nV/1pA |
| HiSMU | Voltage: 200mV, 2V, 20V, 200V; Current: 100nA~10A; Voltage Current: 5uV/2pA; Voltage Current: 100nV/100fA |
| HiSMU | Voltage: 200mV, 2V, 20V, 200 V; Current: 1nA~10A; Voltage Current: 5uV/20fA; Voltage Current: 100nV/0.1fA |
| Module | Window, 10s; Current; ≥14Bits (AC/DC, ); Wavelength ≦ ±1% |
| Module | DSP, Equipment, Bandpass Bandwidth, < 25 us ( ), <50us; <1us; RXYθ, ΜSB: 0.001s~100s; 107; 0.1 nA; Voltage: 10V |
| Module | Voltage: -10V~＋10V; Voltage: ≤1 mV |
| Module | 1k Hz; 106; >14Bits; >50us; >10,000; Wavelength ≦ ±1% |
| Detector | Si Detector; Ge Detector; Ge Detector; Detector; Detector |
| Module | 150w Light Source; 0-5 Sun CW; Lens Bracket; XY, 550nm, 850nm |
| Module | 78K-500K; ±0.1K |
| Module | Magnification: 50~500; 5X,10X,20X,50X; XY 75 × 30mm, 20um; Camera: 830; Camera: 45@3840x2160, 70@1920x1080; 0.02ms~15s |
| Module | ≧4.5; KF40; Lens; Diameter ≧1mm; BNC, Bracket; (1-6) |
| Module | AM0/AM1.5/AM1.5Goptional |
| Fixture | Number of Channels: ≥6; Fixture; Detector; Fixture |
| Dimensions | 7; ( Dimensions ≧180x180mm); ≧7L/min; Z; ≧0.5mm; ≧4 Z, ≧30mm; 4 |
| Fixture | 手动调整探针位置 |
| Voltamp characteristic test | IV single point test IV segment scan test IV cycle scan test |
| Stability test | Stability test of spectral response parameters Stability test of volt-ampere characteristic parameters |
| part | category; parameter |
| xenon lamp | Spectral range: 190nm~1100nm; Power: 75 W-450W |
| Halogen lamp | Spectral range: 350nm~2500nm; Power: 60W-450W |
| Deuterium lamp | Spectral range: 160nm~400nm; Power: 60W-450W |
Applications
Datasheet
Supplier Information
Related Products
-
LD series laser width noise meters
Measurement Devices
Ovlink
Phase Noise Measurement Level: 10Hz; 100Hz; 1kHz; 1MHz Scale width precision: <3Hz System White Noise Floor: -160dBc/Hz@1MHz
The LD series laser-line width/noise gauge uses an innovative, interconnective detection and high-speed interconnectivity algorithm; can significantly reduce the introduction of additional noise into the test system; without the need for additional low-noise reference light sources and assistive devices; can achieve real-time high accuracy measurements of laser phase noise and linear width and are not limited by light source wavelengths; and measure accuracy of the fraction width can reach the Hz level. Super-low-level phase noise/frequency noise measurement Accurate definition of the width of the fraction/FHWM line A real-time rapid measurement Without the need for stable reference light source full-band measurements A simple operational interface (keyrat/touch screen control) Support customisation, performance and extension beyond basic laser phase noise and width (cumulation & background) measurement functions; this product also provides a dedicated module upgrade/sorting program; it expands the following functions; laser relative strength noise (RIN) measurements Microwave signal phase noise/frequency noise measurements
-
Laser tube LIV test system
Measurement Devices
Ovlink
The laser tube LIV test system is a test system consisting of laser drivers, laser traps, photopower test modules and upper machine software. The main functions performed by the test system are to test the laser's LIV curve properties, the Kink point and the threshold current. Drivers are self-developed by the company; they are accompanied by custom-made laser traps; and a variety of sealed lasers, such as butterflies, DIL, TO, FP, etc. The drive has high accuracy current and temperature control. The test system is characterized by a high rate of test response; it takes less than 60 seconds for 100 test points at 0.01°C. Test ranges can be customised; users can set different current steps in different test ranges to improve test efficiency and accuracy. High-precision, high-stable temperature, high-precision current control
-
Thread-wide test system NWTS-1000
Measurement Devices
Ovlink
The wiring test system designed by the company is a fully autonomous set of systems that have the advantage of being capable of testing the wiring, data accuracy, operational simplicity and suitability. The ultra-low noise drive of OUD-600B, which was developed by my company; the test results were more accurate. Performance characteristics: Minimum test line width 0.9 kHz to test wavelength wide detector sensitivity high embedded light decay; fit for different power lasers equipped with 4.3 inches of high-resolution touch screen; interface simple beauty
-
High precision pulse source table
Measurement Devices
Ovlink
Current Settings Range: 0.1A-80A Minimal pulse current step: 100mA Pulse Current Output Accuracy: 100mA 3%of setpoint
SMP2008 is a high-precision pulse source table of large currents, narrow veins, high voltage; supports ns-level narrow pulse output, PIV curve scans and characterization parameter analysis; supports touchscreen and key-based operations; supports multiple communication interfaces and UCD data preservation; integrates pulsive voltage sources, current meters, voltage meters and photopower meters; and is user-friendly. Supports the minimum narrow pulse width 10ns pulse output test. Maximum outputable pulse current 80A; support pulse current waveform monitoring. Support for PI, VI measurements and their curves. Supports the real-time preservation of test data and curves on disks. Support for voltage, current and power calibration. Multiple interfaces such as Internet, serial and USB are supported. Support for uplifting operations. Provide external pointsball test power (selection)
-
Microcode automatic measurement equipment
Measurement Devices
Hglaser
• Multi-product free switching; one-key switching. • Supporting microcodes of various specifications; e.g., DM; QR; etc. • High-resolution imaging systems; 600W resolution industrial array cameras; support for coaxies; external lighting systems. • High resolution; high precision; and 10x high-resolution mirrors to achieve micro-level recognition. • Microcode Depth Automatic Measurement; Content Reading; Quality Level Output; Microcode Size; Code Point Size Measurement. • High-precision three-axis motion control platform adapted to different sizes; microcode measurements of product at different locations. • Auto-correction function for 2D level target; measurement errors that reduce anthropogenic factors; vacuum negative pressure adsorption systems; ensuring measurement stability
Related Articles
Polycom Photonics Co., Ltd focuses on the R&D and mass production of high-stability, narrow-linewidth laser sources for optical sensing applications. The company provides cost-effective and high-precision optical sensing lasers with a wavelength coverage from 689nm to 2350nm. Featuring accurate wavelength control and outstanding spectral stability, these laser products are widely applied in atomic spectrum detection, element precision measurement and professional optoelectronic sensing systems.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
A spatial modulator, most commonly known as a Spatial Light Modulator (SLM), is a core programmable optical device widely used in modern photonics, imaging, and laser systems. It enables precise, dynamic control of light beams, making it indispensable for advanced optical technology and industrial optical equipment.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
Loading...
Name
Phone
Organization
Use Case
Database Platform