HAPSITE CDT Chemical Identification System
HAPSITE CDT is a portable chemical identification system designed for military, civilian, and hazardous response teams to identify and quantify chemical threats such as narcotics, chemical warfare agents, explosives, and toxic industrial chemicals. It provides lab-quality results on-site within minutes, enabling critical health risk assessments.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions (L×W×H) | 51.3×50.4×20.0cm |
| Weight | 19.2kg with 1 battery |
| Operating Temperature | 0-45°C |
| Operating Humidity | 5-95% relative humidity |
| Power | 24VDC Ext Power, 28VDC Li-Ion Battery |
| Battery Life | 5 hours w/ analysis mode (2 batteries) |
| Sample Inlets | Air cartridge |
| Sample Inlets | syringe injector |
| Mass Range | 10-424AMU (1-424AMU in SIM Mode) |
| External Communication | 802.11G, USB, GPS, Ethernet |
| GC Column | Restek RXi-5ms 10m×0.25mm ID, 0.25μm |
| Maximum Column Temperature | 220°C |
| Carrier Gas | Nitrogen |
| Start Up Time | <15 minutes |
| Mass Analyzer Type | Quadrupole |
| Vacuum System | Non-evaporable getter (NEG) pump/ion pump and optional mechanical pumping accessory |
| Quantitative Methods | Yes |
| Libraries | AMDIS w/ configurable targeted library: NIST, NIOSH |
| Certifications | CE, IP65 |
| Warranty | 2 years included |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
VOCs Optical Gas Imaging Thermal Camera
Gas Analysis
Ulirvision
: Cooled high sensitivity detector : 30μm
-
CO2 Optical Gas Imaging Thermal Camera
Gas Analysis
Ulirvision
: Cooled high sensitivity detector : 30μm
-
SF6 | NH3 Gas Leak Detection Infrared Thermal Camera
Gas Analysis
Ulirvision
: Cooled Quantum Well Detector (QWIP) : 15μm
-
AQ7100 Micro Ambient Air Quality Monitoring System
Gas Analysis
Wayeal
Monitoring Factors: SO2、NO2、CO、O3、PM2.5、PM10 Meteorological Parameters: 风速、风向、温度、湿度、大气压 Monitoring Network Mode: 高密度网格化布局、群防式协同监测网络
The AQ7100 Micro Ambient Air Quality Monitoring System is a low-cost, multi-parameter integrated compact ambient air monitoring system developed by WAYEAL based on its extensive experience in the environmental monitoring field. Through a scientific and rational 'combined point placement' deployment scheme, the system targets various monitoring objects and parameters such as urban residential areas, industrial parks, regional boundaries, road traffic, and pollutant transmission channels, forming a 'group-prevention' collaborative monitoring network and a professional data calibration system. It achieves full coverage of the environmental monitoring network, enables high temporal-spatial resolution air pollution monitoring, and combines information-based big data applications to realize pollution source tracing, early warning and forecasting, providing timely and effective decision support for environmental pollution prevention and control.
-
AQ7800 Ambient Air Non-Methane Total Hydrocarbons Continuous Monitoring System (Direct Measurement Method)
Gas Analysis
Wayeal
Detection Method: GC-FID Measurement Method: 直测法（Direct Measurement） Measured Components: 甲烷、非甲烷总烃（CH4、NMHC）
The AQ7800 is a methane and non-methane hydrocarbon analyzer independently developed by WAYEAL for direct measurement of non-methane total hydrocarbons (NMHC) in ambient air. Based on the GC-FID method, the instrument performs backflushing and enrichment processing on the sampled gas to directly measure methane and NMHC concentrations, enabling accurate measurement of higher-concentration NMHC. It complies with HJC-ZY84-2020 'Technical Requirements and Detection Methods for Ambient Air Non-Methane Total Hydrocarbons Continuous Monitoring System'. During operation, ambient air enters the sampling system at a constant flow rate; after dust removal, it is enriched and dehydrated at low temperature through a large-capacity composite trap column. With MFC superimposed sampling volume, valve switching and backflushing, methane and total hydrocarbons are separated into individual peaks for direct concentration determination. The fully heat-traced detection module effectively prevents loss of high-boiling-point and high-concentration samples, achieving a detection limit of ≤1ppbC, superior to the 20ppbC required by the latest standard.
Related Articles
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
Looking for a market-verified 808nm pump laser diode? This guide introduces HAUCORE DM-8E5A-8OD (HGLD-808-COS-D-5W), its core advantages, key specs and mainstream industrial, medical & research applications.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
Loading...
Name
Phone
Organization
Use Case
Database Platform