100mJ Laser rangefinder and laser target designator 100 LR100
Model: LR100. The LR100 precision target designator ranges beyond 30 kilometers with 5-meter accuracy. It comprises a transmitter, receiver/ranging unit, laser driver and control/communications unit. Functions include laser ranging and designation, optically isolated signal triggering and external triggering.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| 激光波长 | 1064nm±1nm |
| 泵送模式 | Semiconductor side pumping (without an amplification stage) |
| 照射频率 | Reference code 45ms—125ms (check code 20Hz) |
| 触发方式 | Internal and external triggering (trigger delay: 304us+-1us) |
| 输出能量 [@20Hz] | ≥100mJ@20Hz |
| 最大照射距离 | ≥12km |
| Q开关模式 | electro-optical Q switching |
| 脉冲宽度 | 10ns ~ 20ns |
| 光束发散角 [验收方法采用孔洞法，孔洞与None孔洞的比例不小于86.5%] | Uses 0.15mrad (acceptance uses the aperture method; the ratio with and without the aperture is at least 86.5%) |
| 脉冲能量稳定性 [RMS] | ≤8%(RMS) |
| 辐照工作周期 [常温或低温] | Operate for 90 seconds, rest for 60 seconds; 4 cycles at normal or low temperature, 1 cycle at high temperature of 600 degrees Celsius |
| 电源 | DC 24V±4V |
| 功耗 [常温待机电流：<2A，峰值工作电流<10A，高低温待机电流<3.5A] | <240W (normal-temperature standby current: <2A, peak operating current <10A, high/low-temperature standby current <3.5A) |
| 通信串口 | RS422 |
| 外部触发接口 | 3V differential-level drive, RS422 interface (delay from trigger signal to laser output: 304us+/-1us) |
| 编码模式 | Precise frequency coding, time coding, pseudorandom coding |
| 使用精度 | <+-1us |
| 测距模式 | 0~5hz ranging |
| 最大测量距离 | >30km (visibility 20km, typical target 2.3x2.3m, target reflectance >20%) |
| 最小测量距离 | 300m |
| 测距精度 | ±5m |
| 工作温度 [低温] | -40C |
| 储存温度 [低温] | -45℃ |
| 工作温度 [高温] | + 60C |
| 工作温度 [高温] | +65℃ . |
| 相对湿度 | 95%±3%; |
| 温度 [湿度] | +35℃±2℃ |
| 保存时间 [湿度] | 72h. |
| 尺寸 | ≤282.2X173X87 |
| 重量 | ≤3.1kg |
| 影响-冲击波形 | Half-sine pulse |
| 影响-峰值加速度 | 10g |
| 影响-脉冲宽度 | 11ms |
| 影响-冲击次数 | 3 units along the vertical axial direction |
| 振动-频率范围 | 5～16Hz, single-amplitude displacement: 1.5mm |
| 振动-频率范围 [光学Equipment16～60Hz] | 16～200Hz (16～60Hz for optical equipment), acceleration: 1.5g |
| 振动-一次扫描时间 | 12 minutes |
| 振动-期间 | Along the vertical axis: 36 minutes |
| 电源接口 | +24VDC ±10%; |
| 外部触发电平 | RS422 differential levels; |
| 制冷模式 | The cooling fan on top of the housing is switched on; |
Datasheet
Supplier Information
Related Products
-
Two-dimensional scanning galvanometer
Laser Scanning and Ranging
Startin-optronics
-
Two-dimensional scanning galvanometer kit
Laser Scanning and Ranging
Startin-optronics
-
Two-dimensional scanning galvanometer module
Laser Scanning and Ranging
Startin-optronics
-
100mJ Single-lens laser target designator 100K30 LR100K30
Laser Scanning and Ranging
Erdikeji
Laser Type: NdYAG Laser Wavelength: 1.064 μm± 1μm Pulse Energy: ≥100mJ
Model: LR100K30. The LR100K30 single-lens laser target designator uses a distinctive source design for compact construction, long ranging distance and high output. Dimensions of 270X110X90 accommodate laser energy up to 100 millijoules, pulse width above 10 nanoseconds and initial divergence 50% smaller than conventional products. A common transmit/receive aperture keeps the design compact for electro-optical pods, vehicle-mounted target-designator ranging and other applications.
-
Laser ranging module high-accuracy distance sensor LR1500E2
Laser Scanning and Ranging
Erdikeji
Laser Wavelength: 905 nm ±5 nm Laser beam divergence: < 6 mrad (small laser spot) Optical material: Resin aspheric lens
Model: LR15000E2. The LR1500E2 laser ranging module is a high-performance, lightweight sensor for long-distance measurement. High accuracy, a small aiming spot, ultralow power consumption, durability and flexibility meet industrial, outdoor and commercial requirements. Reliable performance and easy integration suit projects requiring stable, high-quality ranging.
Related Articles
Recently, our R&D crew carried‑out performance tests on domestically‑made third‑party LiDAR hardware. The original built‑in sensor chip was replaced by Optics‑Valley Quantum’s new‑generation D‑XXLA200‑02 chip.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
Loading...
Name
Phone
Organization
Use Case
Database Platform